Anritsu MG3694B

Anritsu MG3694B

40GHz Microwave Signal Generator

The Anritsu/Wiltron MG3694B is one of our refurbished 40GHz Microwave Signal Generators.

Price: Please Call



Click to email this item to a friend Click to print this product


Anritsu MG3694B Features:

  • Satellite R&D and manufacturing
  • Electronic warfare/jamming R&D and manufacturing
  • Military maintenance
  • Microwave component R&D and manufacturing
  • IC testing for OEMs

The Anritsu/Wiltron MG3694B RF/Microwave signal generator offers the highest output power, best-in-class spectral purity, and fastest switching speed. For example, the Anritsu/Wiltron MG3694B can provide guaranteed +23 dBm at 40 GHz with -94 dBc/Hz phase noise at 1 kHz offset while typically switching at 5 ms per point. This level of performance eliminates the need for external amplification, enables the verification the toughest spectral purity requirements, and greatly reduces test times. If 5 ms per point is not fast enough then switch to the optional analog ramp sweep for even faster measurements.

The Anritsu MG3694B is the "ideal Microwave Generator" because it supplies the user with excellent frequency coverage, leveled ouput power, spectral purity, reliability, and service. These signal generators can be used in R&D, Manufacturing, and depot repair.


  • Twenty independent, presettable CW frequencies (F0 – F9 and M0 –M9).
  • Accuracy: Same as internal or external 10 MHz time base.
  • Internal Time Base Stability: With Aging: <2 x 10–9/day (<5 x 10–10/day with Option 16)
  • With Temperature: <2 x 10–8/deg C over 0°C to 55°C (<2 x 10–10/deg C with Option 16)
  • Resolution: 0.01 Hz
  • External 10 MHz Reference Input: Accepts external 10 MHz ±50 Hz (typical)
  • 10 MHz Reference Output: 1 Vp-p into 50W, AC coupled.
  • Rear panel BNC; 50W impedance.
  • Phase Offset: Adjustable in 0.1 degree steps.
  • Electronic Frequency Control (EFC) Input: –5V to +5V input range
  • High Impedance
  • Phase-Locked Step Sweep Mode
  • Sweep Width: Independently selected, 0.01 Hz to full range.
  • Accuracy: Same as internal or external 10 MHz time base.
  • Resolution (Minimum Step Size): 0.01 Hz
  • Linear/Log Sweep: User-selectable linear or log sweep.
  • In log sweep, step size logarithmically increases with frequency.
  • Steps: User-selectable number of steps or the step size.
  • Number of Steps: Variable from 1 to 10,000



Anritsu MG3694B - Option Descriptions