Anritsu MS610C

Anritsu MS610C

Portable Spectrum Analyzer, 9kHz to 2GHz

The Anritsu MS610C is one of our used Spectrum Analyzers.

Price: Please Call



Click to email this item to a friend Click to print this product


Product Overview:

The Anritsu MS610C spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu MS610C. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Anritsu MS610C Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Anritsu MS610C spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Anritsu MS610C spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.




  • Form Factor: Benchtop 
  • Input Impedance: 50 Ohm 
  • Minimum Frequency: 9 kHz 
  • Maximum Frequency: 2 GHz 
  • Zero Span: Yes 
  • Minimum Span: 0.1 MHz 
  • Maximum Span: 1 GHz 
  • Minimum Sweep Time: 10 ms 
  • Maximum Sweep Time: 10 s 
  • Minimum Resolution Bandwidth: 1 kHz 
  • Maximum Resolution Bandwidth: 1 MHz 
  • Resolution Bandwidth Steps: 1/3/10 
  • Minimum Video Bandwidth: 100 Hz 
  • Maximum Video Bandwidth: 10 kHz 
  • Video Bandwidth Steps: 1/10/100 
  • Maximum Single-Side-Band Noise: -70 dBc/Hz 
  • Maximum Safe AC Input: 20 dBm 
  • Maximum DC Input: 100 V 
  • Maximum Displayed Average Noise: -115 dBm 
  • Maximum Amplitude Uncertainty: 1.5 % 
  • Trigger Modes: Freerun,TTL 
  • Connector type (main signal): Type-N(f) 
  • Cal Output Connector Type: BNC(f) 
  • Probe Power: No 
  • Noise Source Driver: No