California Instruments 1001P Features:
- Low THD
- 800 VA to 1250 VA Output Power
- Portable Power, Low Cost
- Simple Front Panel Operation
- 16 Hz to 500 Hz Frequency Range
- High Peak Current Capability
- Remote Control Option
- AC Power: 1000 VA
- Range Low 0-135 V(L-N)
- Range High 0-270 V(L-N)
- Accuracy @ 50/60 Hz: ± 1 % FS
- Accuracy @ 40 Hz: ± 2 % FS
- Resolution: 0.1 V
- Line & Load Regulation lo range: ± 1 % FS
- Line & Load Regulation hi range: ± 0.5 % FS
- Total Harmonic Distortion @ 50/60 Hz: < 0.55 % typical
- Output Noise: < 0.1 V typical
The California Instruments 1001P is an ideal source for general purpose AC power applications that require variable voltage and frequency at power levels up to 1,250 VA. With simple knobs used to set voltage, frequency and current limit, the P Series provides an inexpensive source of AC power in a small, portable and lightweight package.
With European and US outlet sockets to connect the load, the P Series are ideal for a wide variety of applications. Universal input allows use anywhere in the world to provide a convenient source of variable utility power for the testing and evaluation of domestic and commercial equipment. All common line voltage and frequency combinations are covered.
The extended output frequency range of 16 Hz to 500 Hz makes the P Series a suitable source for both commercial as well as avionics applications. Dual voltage ranges provide maximum output current at any programmed voltage up to 270 Volts. The built in RMS current measurement function eliminates the need for external current shunts or transformers to determine load current requirements of the unit under test. For bench use, the P Series features simple and intuitive controls for setting voltage, frequency and current limits. Current drawn by the load can be read directly on the large LCD display to 100 mA resolution. High peak current capability of more than three times the RMS current allows the P Series to drive non-linear loads.
California Instruments 1001P - Option Descriptions