Keysight Agilent HP 1160A Features:
- New no-slip tip with crown point
- Includes a variety of grounding accessories
- Kevlar-reinforced cable and durable probe hook
- Compatible with Infiniium scope AutoProbe interface
- System bandwidth (scope + probe): 500 MHz
The Keysight Agilent HP 1160A Miniature Passive Probe is a small, rugged, general purpose probe for use with the Keysight Agilent HP 54810A, 54815A, 54820A and 54825A Infiniium Oscilloscopes. It is fully compatible with the Keysight Agilent HP AutoProbe interface which completely configures the Agilent Infiniium Oscilloscope for the probe. The Keysight Agilent HP 1160A probe is built and tested for high reliability. The cable has a Kevlar strengthener for added pull strength. The general purpose retractable hook tip is made from a durable music wire and probe tips are replaceable. The Keysight Agilent HP 1160A probe comes with a wide range of accessories including an Keysight Agilent HP Browser that installs over the probe tip. The Browser utilizes a crown point pogo pin that digs into solder and absorbs small hand movements, so is less likely to slip. There is also an alligator lead for general purpose probing, 4 spring grounds for high frequency measurements, a socketed ground lead and IC clips for probing surface mount devices. The handle of the probe can be removed, leaving a miniature probe body with a narrow and sharp tip ideal for probing dense circuit boards.