Keysight Agilent HP E1326B Features:
- 2-Slot, B-size, register based
- DCV, ACV, 2- & 4-wire Ohm, temperature
- 5.5-digit low-noise integrating A/D
- 13 kHz high-speed sampling A/D
- Balanced differential isolated inputs
- Software calibration
The Keysight Agilent HP E1326B is a B-size, 2-slot, register-based VXI module. It is identical in electrical design to the Keysight Agilent HP E1411B, differing only in size. The Keysight Agilent HP E1326B can be used in the Keysight Agilent HP E1302A or the Keysight Agilent HP E1300/01/A/B mainframes. Using the Internal Installation Kit (E1326-80004) or Option 009 when ordering the Keysight Agilent HP E1300/01/A/B, the E1326B can be mounted internally in the Keysight Agilent HP E1300/01/A/B mainframes (saving two module slots). This instrument is especially well suited for data acquisition and computer-aided test applications. This module can be used as an integrating A/D to make 5.5-digit, low-noise measurements, or switch to the sampling A/D to make 14-bit readings at rates up to 13 kHz. When combined with any Keysight Agilent HP VXI relay or FET multiplexer, you can create a multichannel scanning multimeter. By sending just one SCPI command to the E1300/01/A/B mainframe built-in command module or the E1306A command module, you can program the multimeter and the channels of your multiplexers at one time. The Keysight Agilent HP E1326B provides flexible triggering with built-in timer pacer.