Keysight Agilent HP N1625A

Keysight Agilent HP N1625A

DSL TIMS Test Module

The Keysight Agilent HP N1625A is one of our used DSL TIMS Test Modules.

Price: Please Call

Refurbished

Quantity:   

Click to email this item to a friend Click to print this product

 

Keysight Agilent HP N1625A Features:

  • Line Qualification Test Sequencing
  • For analog services including VF-POTS and Modem.
  • Signal Frequency, Level, and Attenuation
  • Frequency sweep provides fast wideband results that can be viewed simultaneously on the large display providing easy-to-read results at a glance.
  • Noise Tests
  • Perform noise or noise with holding tone tests, impulse noise, noise balance, and noise to ground tests. View level, low, middle and high.
  • 23-Tone Transmission Tests
  • Powerful voice band measurement tool including level, signal-to-total distortion, signal-to-noise ratio, second and third order intermodulation distortion and envelope delay distortion.
  • Load Coil Detection Tests
  • Detect load coils on the loop prior to installing DSL.
  • Internal Noise Impairments
  • More powerful than weighted noise measurements, this module can be used to find noise created by other services on the same cable, iIdentify nosie and interference sources and verify proper modem transmit spectrum.
  • Phase Hits, Gain Hits, and Dropouts
  • Easily set threshold and pass/fail criteria for each parameter. View numeric and graphical "meters" simultaneously.
  • Analog Signaling
  • Supports loop-start trunk and, monitors signal states.
  • Digital Subscriber Line Transmission Testing
  • User defined sequences
  • WECo 310 or Bantam Interface
  • Advanced Signaling option
  • Complies with IEEE-743, T1.413
  • ANSI and ITU-T Modules