Philips PM2811/153

Philips PM2811/153

60V/5A/60W, Programmable Power Supply

The Philips PM2811/153 is one of our refurbished 60V/5A/60W, Single Output DC Power Supplies.

Price: Please Call

Refurbished

Quantity:   

Click to email this item to a friend Click to print this product

 

Philips PM2811/153 Features:

  • Output module 60V/10A/60 W
  • Output Voltage range 0 to 60 V
  • Output Current range 0 to 10 A
  • Output Power 60 W
  • Overvoltage protection range 2 to 32 V
  • Accuracy: Output Voltage ± 0.04 % of setting + 10 mV: Output Current ± 0.1 % of setting + 50 mA: Over Voltage Protection ± 0.5 % of setting + 150 mV
  • Temperature coefficient: Output Voltage (0.016 % of setting + 2 mV)/K: Output Current (0.05 % of setting + 2 mA)/K
  • Long term drift (in an 8 hour period): Output Voltage 0.04 % of setting + 5 mV: Output Current 0.05 % of setting + 10 mA
  • Programming Resolution (12bit): Output Voltage 7.5 mV/LSB: Output Current 2.5 mA/LSB: Over Voltage Protection 7.5 mV/LSB
  • Source Effect (for any line voltage change within rating): Voltage ± (0.01 % of setting + 2 mV): Current ± (0.02 % of setting + 2 mA)
  • Load Effect (load change 10 % to 90 % or 90 % to 10 % full load): Constant Voltage ± (0.01 % of setting + 5 mV): Constant Current ± (0.02 % of setting + 5 mA)
  • Load cross regulation Negligible for both voltage and current: Output Noise (PARD):Constant Voltage pp/rms 15 mV/3 mV:Constant Current rms 10 mA:
  • Switching Frequency approx. 20 kHz approx.
  • READBACK ACCURACY:(referred to the output terminals)
  • Accuracy (at calibration temperature):Voltage ± (0.05 % + 25 mV):Current ± (0.1 % + 30 mA)
  • Measuring Resolution (12 bit):Voltage resolution to interface 7.5 mV:Current resolution to interface 2.5 mA:Voltage resolution to display 10 mV:Current resolution to display 10 mA:Max. Current at Reverse voltage 10A:
  • REMOTE SENSE > 0.25 Volt drop per lead (at open sense connections, the output voltage will not be more than 3 V above the programmed value)
  • DYNAMIC OPERATION ÆI=1 A between 1 and 10A between 0.5 and 5A between 1 and 10A
  • Reprogramming delay
    • Range 50 ms to 60 s
    • Resolution 1 ms
    • Default 50 ms
    • Step Interval time up to 60 s