Thus, the 1867 can be set to any common, or uncommon, test voltage for ceramic, mica or paper capacitors, or other devices. The reverse resistance of rectifiers can be readily measured; the low test voltages available are especially useful in measuring solid-state diodes.
An additional range permits measurements up to 2 x 1014 ohms(200T). This unit is easy to use with direct-reading meter indication and lighted range switch that shows the multiplier for each range and voltage.
The maximum current possible at the terminals is limited to a 25mA when at the 500V-1090V range. Stable power supplies and feedback voltmeter circuit minimize drift and time-wasting adjustments.
Guard and ground terminals permit measurement of grounded or ungrounded two- or three-terminal components.
- Economical Megohmmeter
- High Charge Current up to 25mA
- 200 Test Voltages: 10 to 1090V
- 50kO to 200TO (2 x 1014O)
- Pass/Fail Indication
- Simple Operation