The Audio Analyzer UPL16 can be used in system applications in different ways:
UPL16 together with Digital Radiocommunication Tester CRTx
This application is ideal for type approval and development labs. For CRTx the software package CRTKAUD is required to operate also the speech coder of the CRTx, available for FR (full rate), EFR (enhanced full rate) and HR (half rate) test mode. The test cases are started from the user interface of the CRTx, the UPL16 is controlled via IEEE bus. The results are displayed on the UPL16 and transferred to CRTx. Together with the UPL16, acoustical measurements are now added to the large variety of tests provided by CRTx.
UPL16 as part of GSM Simulator TS8916
The combination of UPL16 and CRTx is fully integrated in the TS8916 system. Performance and operation, concerning the control of UPL, activation of test cases and speech coder via CRTKAUD, as well as result handling are practically identical on CRTx and TS8916.
UPL16 together with Digital Radio- communication Tester CMD52,55,65 or CMU200
This is the ideal and cost-effective combination for testing the acoustical quality in development, quality assurance, production, etc. The CMD or CMU sets up a call to the mobile via the RF link. Then the test cases are started from the user interface of the UPL16 and the results are displayed on the audio analyzer. For some of the tests, the speech codec (FR mode) is needed, which has to be implemented in the CMD or CMU.
- Built-in digital audio interface (DAI)
- Test cases according to GSM 11.10 phase 2
- All kinds of analog and digital test signals including artificial voice
- Analog and digital measurements
- A-Law codec
- UPL16 is part of Type Approval System TS8916
- UPL16 + CRTx for type approval measurements
- UPL16 + CMD or CMU for precompliance testing