Sorensen DHP50-200M2M9D

DHP50-200M2M9D Sorensen DC Power Supply

50V, 200A Power Supply With GPIB Option

The DHP50-200M2M9D is a 10000 Watt DC Power Supply from Sorensen. Supplies DC Voltage and Current to test, design, and troubleshoot electric and electronic circuits. Applications include Burn In, QA, ATE, Research, Design, and Education to name a few.

Price: Please Call



Click to email this item to a friend Click to print this product


NIST Calibration Pricing - $115.00

Sorensen DHP50-200M2M9D Features:

  • 0-50v
  • 0-200a
  • 10kW
  • Power-Off Memory: Enabling the input power and pushing the LAST SET button will restore the supply settings
  • External Shutdown: An external shut down to inhibit the output
  • Up/down arrows control voltages, step changes and current
  • Power supply rating
  • Output power, voltage and current
  • All power, voltage and current set points and limits
  • Present and highest AC input voltage
  • Present and highest air inlet temperature
  • Power and auto-step sequence settings
  • Calibration set-up
  • Remote operation set-up
  • Diagnostics fault status summary
  • Safe Power-Up: In the local mode, the output is disabled for additional safety at power up
  • Front Panel Lockout: Most front panel controls are disabled when operated remotely
  • Overvoltage, over-temperature, surge limit, soft start, brown out and short circuit protection current limit fold back.

The Sorensen DHP family provides models ranging in output power from 5 kW to 20 kW in a single chassis. Programmable output voltages range from 5V to 50 VDC, delivering up to 3,000 amperes. This family has two operational modes, constant-voltage and constant-current. The DHP family uses control technology that allows 9 auto sequence steps, each step can be up to 99,999 seconds in duration. Combining all the steps allows a maximum auto-step program 27.7 hours long. Various voltages, currents and durations can be programmed for each step.