Sell Test Equipment

220015 Biddle HiPot

Used
The 220015 is a HiPot from Biddle. HiPot, or high potential, is a class of electronic test equipment used to verify electrical insulation. Engineers use HiPot-testing instruments on cables, wires, circuit boards, appliances, electric motors, and transformers. As a product ages, its insulation may break down and result in current flow leakage. HiPot testers keep engineers safe from current leakages by detecting gaps and defects in the electronic device. Dielectric Testers, Insulation Testers, and Megohmmeters are similar to HiPot testers. Popular manufacturers include Biddle, Megger, Fluke, Associated Research, Quadtech, Instek, and Slaughter.

Additional Features:

  • Input: 120 VAC, 50/60 Hz
  • Voltage: 0 to 15 kVdc, negative with respect to ground
  • Current: 2 mA continuous
  • Short Circuit: 12 mA max., limited by circuit breaker
  • Kilovoltmeter: 4-in. (102-mm) taut band with two ranges, 0 to 7.5 and 0 to 15.0 kV
  • Current Meter: 4-in. (102-mm) taut band with four ranges, 0 to 5/50/500 μA and 5 mA
  • Accuracy: ±2% of full scale
  • Temperature Range: 0 to 122° F (–17.7 to +50° C) operating
  • Compact and portable
  • Air insulated, uses no oil
  • ±2% accuracy
  • Leakage current measurement as low as 0.1 mA
  • Continuously variable test voltage with zero-start safety interlock
  • Fast charging of high-capacitance samples
  • Current guard circuit for highly accurate measurements
  • Strip chart recorder for hard copies (optionally available)

The Biddle 220015 dielectric test sets measure leakage current while applying a DC voltage at or above the insulation system’s operating level. This measurement aids in determining the insulation system’s ability to withstand overvoltages such as lightning strikes and switching surges.

ValueTronics New and Used Test Equipment, All Rights Reserved