Sell Test Equipment

2705B BK Precision Multimeter

New
Special Price $64.95 Regular Price $70.00

The 2705B is a 3.5 digit handheld multimeter from BK Precision. A multimeter is an instrument used to test and measure alternating current (AC) or direct current (DC) voltage, resistance, and electric current. Multimeters combine voltmeters, ammeters, and ohmmeters. Electricians use multimeters to run diagnostics on batteries, switches, components, power sources, and motors.

Free Shipping

 Additional Features:

  • Magnetic hanger
  • One-handed operation
  • Auto/manual ranging
  • Auto power off
  • Measures up to 10 A (AC & DC)
  • DC voltage to 1000 V
  • AC voltage to 750 V
  • Resistance to 40 MΩ
  • Continuity test
  • Diode test
  • One Year Warranty

Specifications

DC Volts

  • Ranges: 400 mV, 4 V, 40 V, 400 V, 1000V
  • Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
  • Accuracy: ± (1.0 % rdg + 2 dgts)
  • Input Impedance: 400 mV: >100 MΩ; 4 V: 10 MΩ; 40 V to1000 V: 9.1 MΩ
  • Overload Protection: 1000 VDC or 750 VACrms

AC Volts (50 Hz-500 Hz)

  • Ranges: 400 mV, 4 V, 40 V, 400 V, 750V
  • Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
  • Accuracy: 400 mV range at 50 Hz to 100 Hz ± (2.0 % rdg + 5 dgts)
  • Input Impedance: 400 mV: >100 MΩ; 4 V: 10 MW; 40 V to 750 V: 9.1 MΩ
  • Overload Protection: 1000 VDC or 750 VACrms

DC Current

  • Ranges: 400 uA, 4000 uA, 40 mA, 400 mA, 10 A
  • Resolution: 0.1 uA, 1 uA, 10 uA, 100 uA, 10 mA
  • Accuracy: 400 uA to 400 mA ranges: ±(2.0 % rdg + 2 dgts); 10 A range: ± (3.0 % rdg + 3 dgts)
  • Input Protection: 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
  • 10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period

AC Current (50 Hz-500 Hz)

  • Ranges: 400 uA, 4000 uA, 40 mA, 400 mA, 10 A
  • Resolution: 0.1 uA, 1 uA, 10 uA, 100 uA, 10 mA
  • Accuracy: 20 mA to 200 mA ranges: ± (2.0 % rdg + 8 dgts); 10 A range: ± (3.5 % rdg + 8 dgts)
  • Input Protection 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
  • 10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period

Resistance

  • Ranges: 400 Ω, 4 kΩ, 400 kΩ, 40 MΩ
  • Resolution: 0.1 Ω, 1.0 Ω, 100 Ω, 10 kΩ,
  • Accuracy: 400 Ω to 400 kΩ ranges: ± (1.5 % rdg + 4 dgts); 4 MΩ range: ± (2.5 % rdg + 4 dgts); 40 MΩ range: ± (5.0 % rdg + 4 dgts)
  • Open Circuit Voltage (typical): -0.45 VDC (-1.2 VDC on 400 Ω range)
  • Overload Protection: 500 VDC/ACrms

Diode Test

  • Test Current: 1.0 mA (typical)
  • Resolution: 10 mV
  • Accuracy: ± (3.0 % rdg + 3 dgts)
  • Audible Indication: <0.25 V
  • Open Circuit Voltage: 3.0 VDC (typical)
  • Overload Protection: 500 VDC/ACrms

Continuity

  • Audible Indication: Less than 25 Ω
  • Response Time: 500 ms
  • Overload Protection: 500 VDC/ACrms

General

  • Display: 3 3/4-digit, 3400 count LCD
  • Polarity: Automatic, positive implied, negative polarity indication
  • Overrange: OL or -OL is displayed
  • Low Battery Indication: The battery symbol will display when battery voltage drops below operating levels
  • Measurement Rate: 2 times per second
  • Auto Power Off: Approximately 10 minutes
  • Operating Environment: 0ºC to 50ºC at <70 % relative humidity
  • Storage Environment: -20ºC to 60ºC at 0 to 80 % relative humidity
  • Accuracies: Stated accuracy at 23ºC ±5ºC at <75 % relative humidity
  • Temperature Coefficient: 0.1 x (specified accuracy) per ºC. (ºC to 18ºC, 28ºC to 50ºC)
  • Powe:r Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
  • Battery Life: 150 hours typical
  • Dimensions: 165 mm (H) x 78 mm (W) x 42.5 mm (D)
  • Accessories Supplied: One set test leads, one spare fuse, 9V battery (installed) and instruction manual

The 2705B is a full-featured auto-ranging DMM that combines performance, value and functionality. The 3400 count LCD can display resistance values up to 40 MΩ. With the auto-power-off feature, you won’t have to worry about accidental battery consumption. Value-packed features make this meter a must in every "Tool Kit".

ValueTronics New and Used Test Equipment, All Rights Reserved