2707B BK Precision Multimeter

New
$97.00

The 2707B is a 3.5 digit handheld multimeter from BK Precision. A multimeter is an instrument used to test and measure alternating current (AC) or direct current (DC) voltage, resistance, and electric current. Multimeters combine voltmeters, ammeters, and ohmmeters. Electricians use multimeters to run diagnostics on batteries, switches, components, power sources, and motors.

Additional Features:

  • Magnetic hanger
  • One-handed operation
  • True RMS
  • Measures up to 10 A (AC & DC)
  • DC voltage to 1000 V
  • AC voltage to 750 V
  • Resistance to 2000 MΩ
  • Capacitance to 20 uF
  • Continuity test
  • Diode test
  • Logic test
  • hFE Transistor test
  • One Year Warranty

Specifications

DC Volts

  • Ranges: 200 mV, 2 V, 20 V, 200 V, 1000V
  • Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
  • Accuracy: ± (0.8 % rdg + 1 dgts)
  • Input Impedance: 10 MΩ
  • Overload Protection: 1000 VDC or 750 VACrms

AC Volts (50 Hz-500 Hz)

  • True RMS: Applies
  • Ranges: 200 mV, 2 V, 20 V, 200 V, 750V
  • Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
  • Accuracy: 200 mV & 20 V ranges: ± (1.5 % rdg + 8 dgts); 200 V & 750 V ranges: ± (2.0 % rdg + 8 dgts)
  • Crest Factor: <3
  • Input Impedance: 10 MΩ
  • Overload Protection: 1000 VDC or 750 VACrms

DC Current

  • Ranges: 20 mA, 200 mA, 10 A
  • Resolution: 10 uA, 100 uA, 10 mA
  • Accuracy: 20 mA to 200 mA ranges: ± (1.0 % rdg + 1 dgts); 10 A range: ± (3.5 % rdg + 3 dgts)
  • Input Protection: 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
  • 10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period

AC Current (50 Hz-500 Hz)

  • True RMS: Applies
  • Ranges: 20 mA, 200 mA, 10 A
  • Resolution: 10 uA, 100 uA, 10 mA
  • Accuracy: 20 mA to 200 mA ranges: ±(2.0 % rdg + 8 dgts); 10 A range: ± (3.5 % rdg + 8 dgts)
  • Input Protection: 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
  • Crest Factor: <3
  • 10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period

Resistance

  • Ranges: 200 Ω, 2 kΩ, 200 kΩ, 20 MΩ, 2000 MΩ
  • Resolution: 0.1 Ω, 1.0 Ω, 100 Ω, 10 kΩ, 1 MΩ
  • Accuracy: 200 Ω to 200 kΩ ranges: ± (1.0 % rdg + 4 dgts); 20 MΩ range: ± (2.0 % rdg + 4 dgts); 2000 MΩ range: ± (5.0 % rdg + 10 dgts)
  • Open Circuit Voltage (typical): 0.3 VDC (3.0 VDC on 200 Ω, 2000 MΩ range)
  • Overload Protection: 500 VDC/ACrms

Capacitance

  • Ranges: 2 nF , 20 nF, 200 nF, 2.0 uF, 20 uF
  • Resolution: 1 pF, 10 pF, 100 pF, 1 nF, 10 nF
  • Accuracy: ± (4 % rdg + 10 dgts)
  • Overload Protection: Discharge capacitor before connecting

Frequency

  • Ranges: 2 kHz, 20 kHz, 200 kHz, 2 MHz, 20 MHz
  • Resolution: 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz
  • Accuracy: ± (0.1 % rdg + 3 dgts)
  • Sensitivity: 2.0 Vrms minimum
  • Minimum Pulse Width: >25 ns
  • Duty Cycle Limits: >30 % and <70 %
  • Overload Protection: 500 VDC/AC rms

Diode Test

  • Test Current: 1.0 mA (typical)
  • Resolution: 10 mV
  • Accuracy: ± (1.5 % rdg + 3 dgts)
  • Open Circuit Voltage: 3.0 VDC (typical)
  • Overload Protection: 500 VDC/ACrms

Continuity

  • Audible Indication: Less than 100 Ω
  • Response Time: 100 ms
  • Overload Protection: 500 VDC/ACrms

Transistor hFE

  • Range: 0 to 1000
  • Base Current: Approximately 10 uADC (VCE = 3.0 VDC)

Logic Test

  • Threshold: Logic Hi (2.8 V +0.8 V) / Logic Lo (0.8 V +0.5 V)
  • Indication: 40 msec beep at logic Lo
  • Overload Protection: 500 VDC/AC rms

General

  • Display: 3 ½-digit, 2000 count LCD
  • Polarity: Automatic, positive implied, negative polarity indication
  • Overrange: OL or -OL is displayed
  • Low Battery Indication: The battery symbol will display when battery voltage drops below operating levels
  • Measurement Rate: 2.5 times per second
  • Auto Power Off: Approximately 10 minutes
  • Operating Environment: 0ºC to 50ºC at <70 % relative humidity
  • Storage Environment: -20ºC to 60ºC at 0 to 80 % relative humidity
  • Accuracies: Stated accuracy at 23ºC +5ºC at <75 % relative humidity
  • Temperature Coefficient: 0.1 x (specified accuracy) per ºC. (ºC to 18ºC, 28ºC to 50ºC)
  • Power: Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
  • Battery Life: 150 hours typical
  • Dimensions: 165 mm (H) x 78 mm (W) x 42.5 mm (D)
  • Accessories Supplied: One set test leads, one spare fuse, 9V battery (installed) and instruction manual

The 2707B is a full-featured manual ranging true RMS DMM that combines performance, value and functionality. The 2000 count LCD can display resistance values up to 2 GΩ, capacitance to 20 uF, or a transistors common-emitter gain value up to 1000. Value-packed features make this meter a must in every "Tool Kit".

ValueTronics New and Used Test Equipment, All Rights Reserved