3628 NF Corporation Filter

New

Additional Features:

  • Cutoff frequency: 1 Hz to 1.59 MHz
  • No. of channels: 2
  • Roll off: 48dB/oct
  • Max. output current: ±100 mA
  • Filter mode: LP-MF, LP-PL, HPF, BPF, BEF, THRU (MF: maximum flat, PL: phase linear)
  • Operational modes: SEPARATE (separate CH-A and CH-B), CASCADE (serially connected CH-A and CH-B)
  • Pass band gain: X1, X2, X5 selectable at both input and output
  • Input type: Single-ended or floating, selectable
  • Frequency response in THRU mode: DC to 2 MHz (+0.5, -3 dB) typ.
  • Input impedance 1MΩ ± 2%
  • Maximum attenuation: 90dB or greater (to 100 kHz), 70dB or greater (to 2 MHz)
  • GPIB: Standard
  • Power requirements: AC100, 120, 220 or 240V± 10% (max. 250V), switchable
  • Dimensions (mm): 434(W) X 132.5(H) X 400(D)
  • Weight: Approx. 10.5kg
  • Low distortion about 0.02% and low noise about 100 μVrms
  • Function: THRU (vai only input and output amplifiers), LP-MF (max. flat<Butterworth>), LP-PL (phase linear <Bessel>), HPE, BPF and BEF
  • Mode: SEPARATE (independent operating CH-A and CH-B), CASCADE (cascaded CH-A and CH-B)

The NF Corporation 3628 Dual Channel Programmable filter has an extremely wide frequency range with cutoff frequency of 1 Hz to 1.59 MHz for LPF, HPE, BPF and BEF(option).The use of the 3620 series is not limited to electronics; it also covers a wide field of physical experiments, studies on physical properties and other related areas. The 3628 has an attenuation slope of 48dB/oct, and phase linear response is also available in the LPF mode.

More Information
ManufacturerNF Corporation
ConditionNew
TypeVariable
No manuals are currently available. Search all of our available manuals here.