5606-50-J Fluke Probe
New
Special Price
$661.50
Regular Price $735.00
Features:
- -328 to 320°F (-200 to 160°C)
- Transition junction and lead wires can withstand full PRT temperature range
- Unique probe seal of 5606 prevents ingress of moisture
- Calibration not included; NVLAP-accredited calibration optional
Accessories (Included):
- Fluke 5606-50-J Full-Immersion PRT with Banana Plugs
Specifications:
- Temperature Range: -328 to 320°F (-200 to 160°C)
- Nominal Resistance At 0.01°C: 100Ω ±0.1Ω
- Temperature Coefficient: 0.00385Ω/Ω/°C
- Accuracy: ±0.04 at 0.01°C; ±0.06 at 160°C
- Short-Term Repeatability: ±0.03 at 0.01°C; ±0.04 at 160°C
- Drift: ±0.03 at 0.01°C; ±0.04 at 160°C
- Hysteresis: ±0.015°C
- Sheath Length: 1.97in ±0.2in (50mm ±5mm)
- Sheath Diameter: 0.13in ±0.004in (3.1mm ±0.1mm)
- Sheath Material: 316 SST
- Transition Junction Temperature Range: -328 to 320°F (-200 to 160°C)
- Sensor Length: 1.2in ±0.1 in (30mm ±3mm)
- Sensor Location: 1.2in ±0.04in (3mm ±1mm from tip)
- Minimum Insulation Resistance: 20MΩ at 23°C
- Minimum Immersion Length: Full immersion
- Maximum Immersion Depth In Liquid Medium: Full immersion
- Maximum Immersion Depth In Dry Medium: Full immersion
- Response Time: 12 seconds typical
- Self Heating (In 0°C Bath): ±0.003°C
- Lead-Wire Cable Type: Enameled copper wire
- Lead-Wire Length: 8ft (2.4m)
- Lead-Wire Temperature Range: 320°F (160°C)
- Calibration Calibration not included.
The 5606-50-J is a probe from Fluke. The diameter of the lead wire on this full-immersion PRT is no greater than 0.2mm, which makes it easy to run lead wires through a freezer door to your readout or transmitter with effectively zero energy loss.
Manufacturer | Fluke |
---|---|
Condition | New |
No manuals are currently available. Search all of our available manuals here.