61601 Chroma AC Source

Features:

• Volts: 150V/0-300V/Auto
• Current : 4A / 2A (150V / 300V)
• Power: 500VA
• Frequency: 15 Hz–1000 Hz
• Compact size and weight attributable to advance PWM technology
• Built-in PFC, provide input power factor over 0.98 (full load)
• AC+DC output mode for voltage DC offset simulation
• Programmable slew rate setting for changing voltage and frequency
• Programmable voltage, current limit
• One-key recall for 9 different voltage and frequency
• Low output impedance for testing IEC 61000-3-2 ( 61605 )
• Comprehensive measurement capability, V, Irms, Ipk, Inrush, P, Q, S, PF, CF of current and etc.
• High output current crest factor, ideal for inrush current testing
• Turn on, turn off phase angle control
• TTL signal which indicates ON/OFF
• Analog programming interface
• 3 units combined to 3-phase power output
• Easy-use software for operation and ON/OFF test
• Optional GPIB and RS-232C interface
• Full protection: OP,OC,OV and OT protection

Specifications:

• 500 VA
• 300 V
• 4 A
• 1 kHz
• 1 Phase

The Chroma 61601 uses modern PWM technology to provide a pure programmable AC signal with distortion less then 0.5%. Instrument provides both AC or DC or AC+DC modes to allow testing of the most complex devices. In addition to advanced readback functions the instrument include a power amplifier mode allowing of power replication of almost any wave shape. The 61601 is suitable for commercial, avionics, and military applications from bench-top testing to mass production. The 61600 series generates very clean AC output with distortion less than 0.3% at 50/60Hz. With the state-of-the-art PWM technology and power factor correction circuit, the 61600 series yields higher efficiency and delivers more output power. The 61600 series is capable of delivering up to 6 times of peak current compared to its maximum rated current that makes it ideal for inrush current test.