Sell Test Equipment

6218A Agilent DC Power Supply


The 6218A is a 10 W, 50 V, 0.2 A, DC Power Supply from Agilent. Supplies DC Voltage and Current to test, design, and troubleshoot electric and electronic circuits. Applications include Burn In, QA, ATE, Research, Design, and Education to name a few.

Additional Features:

  • Voltage: 50V
  • Current: 0.2A
  • Power: 10W
  • Load Effect: 4 mV
  • Source Effect: 4 mV
  • PARD: 200 µA/1 mV
  • Low Ripple and Noise
  • Compact, Impact-resistant stackable case
  • Short-circuit proof
  • Dual function metering
  • Coarse and fine output voltage controls
  • Designed for Bench Use

The Agilent 6218A is a 50V, 0.2A DC Power Supply that is designed for general laboratory use and is equipped with front-panel mounted voltage controls, a combination volt/ammeter, and output binding posts. Output voltage is continuously variable, via coarse and fine controls from 0 V to 15% above the maximum rated output. A switch selects either output voltage or current for display on the panel meter.

Load connections are made via three binding posts. Either the + or the - post may be grounded through an adjacent GND terminal or the supply may be operated floating at up to 300 volts above ground.

The Constant Voltage/Constant Current Model has concentric coarse and fine current controls which allow setting the current-limit point to any value within the current rating. Using these controls, the CV/CC supplies can also be operated as constant current sources with 500 µA load regulation. All CV/CC models can be connected in series or parallel.

ValueTronics New and Used Test Equipment, All Rights Reserved