Features:
- Quad 1×10 Multiplexer for 2-, 4-, or 8-Pole Operation
- Connects to 7001 / 7002 Backplane for Easy Expandability
- 500nV, 100pA Offsets
The Keithley 7011-C / 7011-S / 7111-S Series 40-Channel Multiplexer Cards has four independent banks of 1x10 switching. Each channel is 2-pole. These four banks can be combined for a wide variety of switching configurations-for example, dual 1x20, or 1x10 and 1x30, or one large 1x40. The 7001 mainframe can automatically configure the 7011 to switch 4-pole signals by combining channel pairs. This gives you a dual 1x10 4-pole multiplexer or a single 1x20 4-pole multiplexer.
Each of the four multiplexer outputs on this card connects to the 7001/7002 analog backplane through removable jumpers for even greater flexibility. Two 7011 cards can be used to make a single 1x80 multiplexer with all intercard connections through the backplane. The 7011 multiplexer outputs can also be connected to the rows of the 7012 via the backplane for row expansion.
The Model 7111-S is a form C version of the 7011-S. The 7111-S is a low voltage, quad 1x10, single-pole form C multiplexer card. The 7111-S assembly consists of a screw terminal connector card and a relay card. External test circuits are wired directly to the screw terminals of the connector card.
These cards will automatically configure the 7001 or 7002 mainframe. Two factory connection options are available, screw terminal for maximum flexibility or a single 96-pin quick disconnect connector.
| Manufacturer | Keithley |
|---|---|
| Condition | Used |