750PD50 Fluke Module

Features: 

• Pressure Module 
• -15 psi to 50 psi (-1 to 3.5 bar) 
• (-100 to 350 kPa)

Accessories:

• 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• 1/8 in. NPT Male-to-M20 Male Adapter
• O-RING (-111) Cast Urethane
• Certificate of Calibration
• User Manual

Specifications:

• Parameter/Range - -15 to 50 psi (-1 to 3.5 bar)
• Burst Rating⁶ - 4X
• Hi Side Media² - 316 SS
• Lo Side Media² - N/A
• Reference Uncertainty⁴ - ± 0.0175 %
• Total Uncertainty 1-year (15 °C to 35 °C) - ± 0.035 %
• Total Uncertainty 1-year¹ - ± 0.045 %
• Total Uncertainty 6-month (15 °C to 35 °C) - ± 0.03 %
• Total Uncertainty 6-month¹ - ± 0.04 %

The Fluke 750PD50 Dual Pressure Module, -15 to 50 psi, -1 to 3.5 bar, -100 to 350 kPa (Stainless Steel) is easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. At the touch of a button, the pressure may be displayed in up to 11 different engineering units. When used with the 750 Series Documenting Process Calibrators, pressure readings can be date/time stamped and stored electronically for later retrieval. This saves time, eliminates errors, and supports compliance with quality standards and regulations.

The image is for reference only. See product specification for details.