Features:
- 300V, 2A capacity
- Two 50-pin female D-sub connectors are standard for secure hook-up and quick teardown
- Relay closures stored in onboard memory
Inputs
- Maximum Signal Level: 300VDC or rms, 2A switched, 60W (DC, resistive), 125VA (AC, resistive)
- Contact Life: No Load*: 10.8 closures; At Maximum Signal Levels: 10.5 closures-*1 Minimum signal level 10mV, 10μA
- Channel Resistance (per conductor): <1W
- Contact Potential: ≤4μV per contact.
- Offset Current: <100pA
- Actuation Time: 3ms
- Isolation: Channel to Channel: >10.9Ω, <50pF; Common Mode: >10.9Ω, <100pF
- Crosstalk: (1MHz, 50Ω load): <–35dB
- Insertion Loss (50Ω source, 50Ω load): <0.3dB below 1MHz, <3dB below 10MHz
- Common Mode Voltage: 300V between any terminal and chassis
General
- Relay Switch Configuration: 40 independent channels of 1-pole switching. Isolated from internal DMM
- Contact Configuration: 1 pole Form A
- Relay Type: Latching electromechanical
- Connector Type: Two 50-pin female D-sub connectors
- Firmware: Specified for Model 2700 rev. A01, 2701 rev. A01, and 2750 rev. A01 or higher
Environmental
- Operating Environment: Specified for 0°C to 50°C; Specified to 80% R.H. at 35°C
- Storage Environment: –25°C to 65°C
The Keithley 7705 plug-in module offers 40 channels of independent switching. These channels are designed to control power to the DUT and switching loads. They can also directly control light indicators, relays, etc.
Manufacturer | Keithley |
---|---|
Condition | Used |
Looking for other manuals? Search all of our available manuals here.