772 Fluke Meter

Features

• Source 4 to 20mA signals for testing control system I/O or I/Ps
• mA output linear ramp or 25% step output
• Automatically change the 4 to 20mA output for remote testing
• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without "breaking the loop"
• Measure mA signals for PLC and control system analog I/O
• Dual backlit display with both mA measurement and percent of 4 to 20mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 to 50mA signals in older control systems using the 99.9 mA range
• Power saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements mA measure, jaw mA measure, in circuit Loop power mA source

Accessories (Included)

• 772 Milliamp Process Clamp Meter
• Four AA alkaline batteries (installed)
• Soft carrying case
• TL75 test leads
• AC 72 detachable clip
• TL 940 mini hook test leads
• Hanging tool with hook and loop strap
• Instruction sheet

Application

• Petro-Chemical
• Oil and Gas
• Food and Beverage
• Pharmaceutical

Specifications

• Diameter of Measurable Conductor: 0.177" or 4.5mm max

mA Measurement (Measured by clamp)

• Resolution and Range: 0 to 20.99mA
• Accuracy: 0.2% + 2 counts
• Resolution and Range: 21.0 to 100.0mA
• Accuracy: 1% + 5 counts

mA Measurement (Measured in series with test jacks)

• Resolution and Range: 0 to 24.00mA
• Accuracy: 0.2% + 2 counts

mA Source (Maximum mA Drive: 24 mA into 1,000 ohms)

• Resolution and Range: 0 to 24.00mA
• Accuracy: 0.2% + 2 counts

mA Simulate (Maximum voltage 50V DC)

• Resolution and Range: 0 to 24.00mA
• Accuracy: 0.2% + 2 counts

The 772 is a Milliamp Process Clamp Meter from Fluke. Measure 4 to 20 mA signals with in-circuit measurement, simultaneous mA in-circuit measurement with 24V loop power.