789/773 BU Fluke Process Meter

Features

789 Process Meter

• ProcessMeter with HART Communications/Diagnostics
• Min/Max/Average/Hold/Relative modes
• Diode Test and Continuity Beeper
• Simultaneous mA and % of scale readout
• 20mA DC current source/loop calibrator/simulator
• Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
• Externally accessible battery for easy battery changes

773 Milliamp Meter

• Milliamp Process Clamp Meter with Loop Power, 4-20 mA and DC Volts Source/Measure
• mA in/out: Simultaneously measure mA signal with clamp and source mA signal
• Apply mA input signal to device and measure its 4 to 20mA output on devices such as valves or mA isolators
• Voltage output linear ramp or 25% step output
• Automatically change voltage output for remote testing

Accessories (Included)

• ProcessMeter with HART Communications/Diagnostics (789)
• Milliamp Process Clamp Meter with Loop Power, 4-20 mA and DC Volts Source/Measure (773)
• Premium Test Lead Set (TL71)
• Alligator Clip Set
• 8 AA alkaline Batteries
• Soft Carrying Case
• Test Lead Set (TL75)
• Test Clip Set (AC72)
• Mini Hook Test Lead Set (Red and Black)
• ToolPak Magnetic Hanging Kit (TPAK)
• Users Manual

Specifications

789 Process Meter

• 20mA DC current source
• Precision 1000V, 440mA True-RMS digital multimeter
• Frequency measurement to 20 kHz
• 0.1% DC voltage accuracy
• 0.05% DC current accuracy

773 Milliamp Meter

• DC voltage measurement to verify 24V power supplies or voltage I/O signals
• Source DC voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal
• Scaled mA output provides a continuous mA signal that corresponds to 4 to 20 mA signal measured by mA clamp
• Output mA signal enables logging DMM or other device to record 4 to 20 mA signal without breaking loop

The Fluke 789/773 BU ProcessMeter with HART Communications/Diagnostics and Milliamp Process Clamp Meter Combo Kit is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. And with its built-in, selectable 250 ohm HART resistor, it eliminates the need to carry a separate resistor with you. The 789 also features a large display with two levels of backlighting.