Features:
- Frequency Range: 30 MHz to 40 GHz depending on detectors (see PEAK POWER SENSOR specifications)
- Power Range
- Pulse: -20 dBm to +20 dBm
- CW: -40 dBm to +20 dBm
- (See sensor specifications)
- Time Base Range: 1.2 ns/div to 20 ms/div (12 ns to 200 ms time window), using either the Data Entry Keyboard or the Control Knob.
- Resolution: 0.1 ns
- Trigger Delay Range: 0 to 200 ms using either the Data Entry Keyboard or the Control Knob.
- Resolution: 0.1 ns
- Triggering Modes
- Internal: -10 dBm to +16 dBm
- External (BNC): TTL levels, Maximum PRF 1 MHz
- Markers: Up to 4 markers/channel plus a Reference Power Level cursor
- Graph Display Mode: Plots the outline of the detected pulse on the electroluminscent display
- Input Channels
- 8501A: Single Channel
- 8502A: Dual Channel
- Auxiliary Outputs/Inputs (BNC)
- Monitor: Provides a voltage proportional to the detected RF envelope. Risetime is typically 20 ns, output impedance is nominally 50W
- Analog Output: Provides a voltage proportional to detected power. Scale Factor is 100 mV/dB
- Trigger Input: TTL
- RF Blanking: TTL open collector low during zeroing. Used to control power source
- Voltage Proportional to Freq (V / GHz): Allows direct entry of frequency from RF power sources equipped with a V µ F output
- GPIB Interface
RF Peak Power Meter 30 MHz to 40 GHz
Manufacturer | WaveTek |
---|---|
Condition | Used |
No manuals are currently available. Search all of our available manuals here.