Additional Features:
- HDRC Handheld Dry-Well
- Smallest dry-wells in the world
- Ranges from –10°C to 122°C
- Accuracy to ±0.25°C, stability of ±0.05°C at 0°C
- RS-232 interface with 9930 Interface
- Rapid heating and cooling
- +12 Volt DC battery option
Specifications:
- Range: –10°C to 122°C (14°F to 252°F) at an ambient of 23°C
- Accuracy: ±0.25°C
- Stability: ±0.05°C
- Resolution: 0.1°C or °F
- Well-to-Well Uniformity: ±0.2°C with sensors of similar size at equal depths within wells
- Heating Times: Ambient to 100°C: 10 minutes
- Stabilization: 7 minutes
- Cooling Times: Ambient to 0°C: 10 minutes
- Well Depth: 4 inches (102 mm)
- Removable Inserts: Available separately in sizes from 1.6 mm (1/16 in) to 11.1 mm (7/16 in) [6.4 mm (1/4 in) and 4.8 mm (3/16 in)
- Power: 94–234 VAC (±10%), 50/60 Hz, 50 W; or 12 VDC
- Size (H x W x D): 99 x 140 x 175 mm (3.9 x 5.5 x 6.9 in)
- Computer Interface: RS-232
For work in the temperature range of –10°C to 122°C, the 9102S dry-well is another first in the industry, featuring stability to ±0.05°C.
This dry-well is only four inches high and six inches wide, achieves temperatures as low as –10°C, includes a NIST-traceable calibration, and is stable to ±0.05°C. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient.
The 9102S has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. The 9102S also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable.
The Fluke Calibration 9102S Mid-Range Field Calibrator is a small portable instrument designed for quick on-site checks and calibration of thermocouple and RTD temperature probes. This instrument is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of –10°C to 122°C (14°F to 252°F). Temperature display and setpoint resolution are 0.1 degrees.
Built in programmable features include:
- Temperature scan rate control
- Eight set-point memory
- Adjustable readout in °C or °F
The temperature is accurately controlled by Fluke’s digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with transistor driven thermoelectric devices.
The LED front panel shows the current well temperature. The temperature may be set, using the control buttons, to any desired temperature within the instrument’s range.
Multiple fault protection devices insure user and instrument safety and protection.
This dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use and maintenance, the instrument will provide continued accurate calibration of temperature sensors and devices.
| Manufacturer | Fluke |
|---|---|
| Condition | Used |