BHED22748-200 Comtech PST RF Amplifier

Used
$1,995.00
The BHED22748-200 is a 400 MHz, 200 W RF amplifier from Comtech PST. Amplify RF and Microwave signals to measure, test, and design circuits. Applications include radio communications, cellphones, EMI testing, and much more.
In Stock
Ships Today

Additional Features:

  • Frequency range: 225-400 MHz
  • Output Power: 200 Watts
  • KVA: 2.6
  • Digital Interface: IEEE488
  • Class of Operation: AB Linear
  • RF Input Power: 1mW (0dBm) for full output power
  • RF Input Signals: CW, AM, FM, Phase and Pulse Modulation
  • Harmonics: B.W. <One Octave: -30dBc Max; B.W. <One Octave Even: -20dBc Max; Odd: -12dBc
  • Spurious: -60dBc Max
  • Input VSWR: 2.0:1 nominal
  • Output Load VSWR: 1.3:1, full forward power output 2:1, 0.5dB turndown nominal infinite, 10dB turndown nominal
  • AM Distortion (85% D.O.M.): 10% Max
  • Pulse Rise/Fall Time (typical): 150ns
  • Noise Power Output: -86dBm/Hz typical (model dependent)
  • Maximum RF Input: +8dBm
  • RF Connectors Input: Female Type N, Rear Panel; Output: Female Type N or SC, Rear Panel (model dependent)
  • AC Input: Power Factor Corrected Universal Input 100-240Vac, 50/60Hz
  • Efficiency (AC to RF): 16% typical
  • AM, FM, CW, pulse & phase modulated signal inputs
  • Field-replaceable modules
  • Graceful degradation
  • High efficiency switching power supplies
  • Standard 19” Rack Mount Configuration

Applications

  • EW/ECM systems
  • Communication systems
  • AM/FM transmitter boosters
  • TWT replacement
  • RFI/EMI testing
  • High power calibration testing

Load VSWR Protection

Series BHE amplifiers provide load VSWR protection via an electronic power output turndown system employing negative feedback techniques. The system is self-correcting as a function of load VSWR to infinity, at any phase angle. The typical response time is 60 μsec.

Input/Output Overdrive Protection

A leveling loop system protects the amplifiers from input overdrive signals of up to +8 dB. Under an overdrive condition, the output power is controlled at a level 2 to 10% above the rated output power at normal input level conditions. A power overshoot will be present at the beginning of the overdrive condition, which is a function of the amount of overdrive. Note that this characteristic can be used to obtain a 1 to 3 dB output (or more depending on model) power increase for narrow pulses with a low duty cycle.

The image is a representation of the actual product. Please see specifications and data sheet for details.

ValueTronics New and Used Test Equipment, All Rights Reserved