DCR40-25B2 Sorensen DC Power Supply

Used

Additional Features:

  • Voltage: 0-40V
  • Current: 0-25A
  • Power: 1000W
  • 115 VAC single phase input standard on all models up to 1800 watts
  • 50/60 Hz operation without derating
  • 0.03% line and load regulation (typical)
  • 90mV RMS ripple (model dependent)
  • 50 ms transient response - 50% load change (typical)
  • Low-Level Remote Sensing
  • Manual & Automatic Control
  • Direct & Master-Slave Paralleling & Series Operation 
  • 19" Rack Mountable
  • Low Ripple and Noise
  • Amperage and Voltage Meters
  • Excellent voltage and current regulation with automatic crossover; panel lights indicate operating mode
  • Remote voltage and resistance programming for both voltage and current modes standard
  • Adjustable current limiting (overload/short circuit protection) with automatic recovery
  • Overvoltage protection with crowbar standard on all models

The Sorensen DCR40-25B2 is a member of the 1000W DCR-B2 family of general purpose, rackmount power supplies. The DCR40-25B2 operates at a voltage range of 0-40V and a current of 25 Amps.

The DCR40-25B2, high power programmable power supplies have input SCR preregulator topology plus regulation and transient response performance suitable for nearly all test and measurement applications. The DCR40-25B2 operates from a nominal 115 VAC and exhibits a rapid response to transients, both load and line.

More Information
ManufacturerSorensen
ConditionUsed
Current25 A
Voltage40 V
Power1 kW

Accessories