Additional Features:
- Voltage: 0-40V
- Current: 0-25A
- Power: 1000W
- 115 VAC single phase input standard on all models up to 1800 watts
- 50/60 Hz operation without derating
- 0.03% line and load regulation (typical)
- 90mV RMS ripple (model dependent)
- 50 ms transient response - 50% load change (typical)
- Low-Level Remote Sensing
- Manual & Automatic Control
- Direct & Master-Slave Paralleling & Series Operation
- 19" Rack Mountable
- Low Ripple and Noise
- Amperage and Voltage Meters
- Excellent voltage and current regulation with automatic crossover; panel lights indicate operating mode
- Remote voltage and resistance programming for both voltage and current modes standard
- Adjustable current limiting (overload/short circuit protection) with automatic recovery
- Overvoltage protection with crowbar standard on all models
The Sorensen DCR40-25B2 is a member of the 1000W DCR-B2 family of general purpose, rackmount power supplies. The DCR40-25B2 operates at a voltage range of 0-40V and a current of 25 Amps.
The DCR40-25B2, high power programmable power supplies have input SCR preregulator topology plus regulation and transient response performance suitable for nearly all test and measurement applications. The DCR40-25B2 operates from a nominal 115 VAC and exhibits a rapid response to transients, both load and line.
Manufacturer | Sorensen |
---|---|
Condition | Used |
Current | 25 A |
Voltage | 40 V |
Power | 1 kW |
- Sorensen DCR-B2 Series 500W, 1000W Installation Manual
- Sorensen DCR-B2 Series 500W, 1000W Service Manual
Looking for other manuals? Search all of our available manuals here.
Accessories
PSU 40-38 Instek DC Power Supply
Special Price
$2,194.50
Regular Price $2,310.00
PSW 80-40.5 Instek DC Power Supply
Special Price
$2,165.48
Regular Price $2,360.00
PSW 80-27 Instek DC Power Supply
Special Price
$1,635.20
Regular Price $1,811.00