DHP30-220 Sorensen DC Power Supply

Used

 Additional Features:

  • Voltage: 0-30V
  • Current: 0-220A
  • Power: 6.6 kW
  • Ripple: 10mV
  • Voltage ranges: 190-253 VAC, 47-63 Hz (Standard)
  • Three phase, 3-wire plus ground, Delta or Wye input may be used
  • Modular Design
  • Sequencing: Power and auto-step sequence settings
  • Safe Power-Up: In the local mode, the output is disabled for additional safety at power up
  • Front Panel Lockout: Most front panel controls are disabled when operated remotely
  • Overvoltage, over-temperature, surge limit, soft start, brown out and short circuit protection current limit fold back
  • Power-Off Memory: Enabling the input power and pushing the LAST SET button will restore the supply settings
  • External Shutdown: An external shut down to inhibit the output
  • Up/down arrows control voltages, step changes and current

The Sorensen DHP30-220 is a 6600 Watt DC Power Supply that uses control technology to permit up to nine steps per sequence with a maximum sequence duration of up to 27.75 hours. The DHP30-220 has standard analog and a variety of combinations of IEEE-488.2M RS-232 and/or isolated analog input control interface options. Various voltages, currents and durations can be programmed for each step. The second generation control technology also provides an improved transient response and readback resolution.

More Information
ManufacturerSorensen
ConditionUsed
Current220 A
Voltage30 V
Power6.6 kW
Options
M10Both IEEE-488.2 and RS 232
M11RS 232 and isolated analog programming
M12IEEE-488.2 and isolated analog programming
M14IEEE-488.2, RS 232 and isolated analog programming
M2432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
M51Isolated analog programming
M9DInternal IEEE-488.2 interface