Additional Features:
- Voltage: 0-50V
- Current: 0-200A
- Power: 10 kW
- Ripple: 10mV RMS
- Modular Design
- Sequencing: Power and auto-step sequence settings
- Safe Power-Up: In the local mode, the output is disabled for additional safety at power up
- Front Panel Lockout: Most front panel controls are disabled when operated remotely
- Overvoltage, over-temperature, surge limit, soft start, brown out and short circuit protection current limit fold back
- Power-Off Memory: Enabling the input power and pushing the LAST SET button will restore the supply settings
- External Shutdown: An external shut down to inhibit the output
- Up/down arrows control voltages, step changes and current
The Sorensen DHP50-200M2M9D is a 10 kW DC Power Supply that uses control technology to permit up to nine steps per sequence with a maximum sequence duration of up to 27.75 hours. The DHP50-200M2M9D has standard analog and IEEE-488.2 interface. Various voltages, currents and durations can be programmed for each step. The second generation control technology also provides an improved transient response and readback resolution.
Manufacturer | Sorensen |
---|---|
Condition | Used |
Current | 200 A |
Voltage | 50 V |
Power | 10 kW |
M10 | Both IEEE-488.2 and RS 232 |
---|---|
M11 | RS 232 and isolated analog programming |
M12 | IEEE-488.2 and isolated analog programming |
M14 | IEEE-488.2, RS 232 and isolated analog programming |
M2 | 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used |
M51 | Isolated analog programming |
M9D | Internal IEEE-488.2 interface |
- Sorensen Ametek DHP Series IEEE 488.2, RS-232 Options Programming Manual
- Sorensen Ametek DHP Series Operation Manual
- Sorensen Elgar DHP Series Operation Manual
Looking for other manuals? Search all of our available manuals here.