DHP50-200M9D Sorensen DC Power Supply

Additional Features:

• Voltage: 0-50V
• Current: 0-200A
• Power: 10 kW
• Option M9D: Internal IEEE-488.2 interface
• Voltage ranges: 190-253 VAC, 47-63 Hz (Standard)
• Three phase, 3-wire plus ground, Delta or Wye input may be used
• Ripple: 10mV RMS
• Modular Design
• Sequencing: Power and auto-step sequence settings
• Safe Power-Up: In the local mode, the output is disabled for additional safety at power up
• Front Panel Lockout: Most front panel controls are disabled when operated remotely
• Overvoltage, over-temperature, surge limit, soft start, brown out and short circuit protection current limit fold back
• Power-Off Memory: Enabling the input power and pushing the LAST SET button will restore the supply settings
• External Shutdown: An external shut down to inhibit the output
• Up/down arrows control voltages, step changes and current

The Sorensen DHP50-200M9D is a 10 kW DC Power Supply that uses control technology to permit up to nine steps per sequence with a maximum sequence duration of up to 27.75 hours. The DHP50-200M9D has standard analog and IEEE-488.2 interface. Various voltages, currents and durations can be programmed for each step. The second generation control technology also provides an improved transient response and readback resolution.