DL10-HCM Teledyne LeCroy Differential Probe

New
$6,590.00
The DL10-HCM is a 1 GHz differential probe from Teledyne LeCroy.
Free Shipping

Features:

  • LeCroy, Probe, 1 GHz 60 V Common Mode Differential
  • Includes standard set of leads and tips
  • 80 V dynamic range
  • 60 V common mode
  • 0.5% gain accuracy
  • Precision gain calibration
  • Best LF flatness (0.1 dB)
  • Lowest noise and highest rejection
  • ProBus active probe interface 

Wide variety of tips

  • High performance solder-in
  • Browser
  • Single pins and header
  • Mini and micro grabbers
  • Socketed connections
  • High temp solder-in
  • Y-banana adaptor

Wide variety of tips

  • High performance solder-in
  • Browser
  • Single pins and header
  • Mini and micro grabbers
  • Socketed connections
  • High temp solder-in
  • Y-banana adaptor

Key Applications

  • 48 V motors and drives
  • High-power DC-DC converters
  • GaN-based PDNs
  • AC-DC switch-mode power supplies
  • Wireless charging systems
  • Gate-drive measurement

Standard leads and tips

  • High performance solder-in tips (Qty. 2)
  • 2” solder-in tip
  • Browser
  • Y-lead socket (2” and 5”)
  • Mini grabbers (Qty. 3)
  • Ground lead
  • Single pin (Qty. 6)
  • Straight pin header (Qty. 2)

Ideal Probes for 48 V GaN Power Conversion

The 60 V Common Mode Differential Probes are the ideal probes for lower voltage GaN power conversion measurement with the highest accuracy, best CMRR, and lowest noise.  60 V of common mode and 80 V differential input range with 1 GHz of bandwidth, make these probes ideal for lower voltage GaN power conversion measurements. The 60 V of common mode is well suited for handling any float of the battery and bulk/absorption voltage during charging, while the 80 V differential input range provide margin for any overshoot.

Highest Accuracy

The DL-HCM probes are calibrated for high-precision measurements to within 0.5% at DC and 0.1 dB flatness from DC to 100 MHz. This ensures high accuracy top and base voltage level measurement of pulse-width modulated signals. The Precision Gain Calibration capability furthers measurement precision by improving the gain accuracy and removing small offset drifts from the measurement configuration.

Lowest Noise and Highest Rejection

The Common Mode Rejection Ratio (CMRR) is exceptional to very high frequencies. This provides for the best measurement performance when measuring very fast slew rate (high dV/dt) PWM signals typical of GaN devices and systems. Exceptional CMRR, combined with low probe noise and high offset capability, makes the probes capable of measuring very small control signals floating on high common mode voltages.

Wide Variety of Tips

The 60 V Common Mode Differential Probes provide the perfect combination of high performance and flexibility for connecting to any device under test. An optional accessory kit and high temperature solder-in tip are available for further connectivity options.

ValueTronics New and Used Test Equipment, All Rights Reserved