E7401A Agilent Spectrum Analyzer

Used

Additional Features:

  • Frequency range: 9 kHz-1.5 GHz
  • Automatic EMI measurements
  • Compatible with the Agilent 7415A EMI software
  • Also compatible with the BenchLink Web Remote software
  • Log sweep
  • 3.5" disk drive
  • 5 minute warm-up
  • Built-in preamplifier
  • Rugged, portable design

Early evaluation of your design's EMI performance is essential for a successful product. The E7401A provides the capabilities you need in an analyzer to make in-house EMI precompliance testing a reality.

When combined with a broadband antenna, the E7401A provides the capabilities to check for radiated emissions coming from your DUT. This is best done in an area that is free from reflective objects such as an open area or EMI chamber.

Test for noise or interference placed on power or data lines by coupling the E7401A instrument to the power or data line through a line impedance stabilization network (LISN) device or absorbing clamp.

If you have an emissions problem, you can use the E7401A with an 11940A or 11941A close field probe to isolate and diagnose the source of the problem.

More Information
ManufacturerAgilent, HP, Keysight
ConditionUsed
Frequency1.5 GHz
Options
1D5High Stability Frequency Reference
1DNTracking Generator, 9 kHz to 1.5 GHz
1DRNarrow resolution bandwidths
A4HGPIB and parallel printer interface
AYQEMI detectors and FM demod
B72Memory extension to 10 MB
Looking for other manuals? Search all of our available manuals here.