E7402A Agilent Spectrum Analyzer
Additional Features:
- Frequency range: 9 kHz-3 GHz
- 1 Hz to 5 MHz (including 200 Hz, 9 kHz, 120 kHz, 1 MHz EMI BW)
- +12.5 dBm TOI
- ≤ 150 dBm displayed average noise level (DANL)
- Automatic EMI measurements
- Compatible with the Agilent E7415A EMI software
- Also compatible with the BenchLink Web Remote software
- Log sweep
- 3.5" disk drive
- 5 minute warm-up
- Built-in preamplifier
- Rugged, portable design
The Agilent E7402A EMC standard analyzer provides the capabilities you need in an analyzer to make in-house EMI precompliance testing a reality. Early evaluation of your design's EMI performance is essential for a successful product. The Agilent E7402A EMC standard analyzer offers you the best value with more productivity options built-in, and guarantees the fast delivery. When combined with a broadband antenna, the Agilent E7402A provides the capabilities to check for radiated emissions coming from your DUT. This is best done in an area that is free from reflective objects such as an open area or EMI chamber. Test for noise or interference placed on power or data lines by coupling the Agilent E7402A instrument to the power or data line through a line impedance stabilization network (LISN) device or absorbing clamp.
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
| Frequency | 3 GHz |
| 060 | Low Emissions |
|---|---|
| 1D5 | High stability frequency reference |
| 1DN | 50 Ohm Tracking generator |
| 1DR | Narrow resolution bandwidths to 10 Hz. |
| 1DS | 3 GHz Preamplifer |
| A4H | GPIB Connection |
| AYQ | EMI detectors and FM demodulation |
| AYX | Fast Time-domain Sweep |
| B72 | Increase memory to 16MB |
| UKB | Low frequency extension 100 Hz (30 Hz useable) |