EI-162BN Fluke Accessory

Features: 

• Transformer half (2)
• Transformer end faces have bolts that pivot to aid in separating
• the Transformer halves
• One Transformer end face has a slotted bolt hole that allows the
• bolt to pivot out of the end face
• Transformation ratio connections: ⊥, 200, 500, and 1000 
• Fastener (2) 
• External dimensions (LxWxD): 46 x 36 x 16 cm (20.5 x 16 x 17.2 in)

Accessories: 

• Two fasteners for holding Transformer halves together 
• One cable bobbin with two 12-meter (40-foot) test leads for connecting the Transformer to the Tester’s jack. The female red and blue leads then plug onto the male red and blue banana plugs on the sensing cable adapter used with the Fluke 1623 and 1625 for selective resistance measurements. (Sensing cable adapter, Fluke part number 2539195). 
• One contact clamp for establishing an earth ground electrode connection point on the transmission line pylon. The clamp features a fastener that secures the clamp to the pylon’s frame. The clamp also has a 4-mm bore hole that fits a standard banana plug, with a tightening screw for securing the plug. 
• One carrying case 
• Users manual 

The Fluke EI-162BN split-core transformer (hereafter referred to as the “Transformer”) is used with an earth ground tester (hereafter referred to as the “Tester”) to make selective earth ground resistance measurements (RE) on transmission line pylons. The Transformer is designed to work with Fluke 1625 and 1623 GEO Earth ground testers. The Fluke EI-162BN 320 mm diameter split core transformer used as a selective clamp for ground loop resistance measurement around power pylons. Inner diameter of the clamp is 320 mm (12.6 in). Includes the split core transformer. This Split Core Transformer can be used in conjunction with the 1625 Kit or the 1623 Kit. If non-kit version is owned, the GEOX Probe Cable must be purchased separately.