Additional Features:
- Frequency range: 20 MHz to 1.3 GHz
- UHF/VHF Test Receiver
- 8-digit LED display
- Resolution: 1 kHz/100 Hz (SSB)
- High measurement accuracy (error <1 dB)
- Wide dynamic range: noise figure typically 8 dB (preamplifier on); 3rd-order IP typically +20 dBm (preamplifier off)
- Field-strength measurements with test antennas
- RFI measurements to CISPR, VDE, and FCC
- Interference measurements to MIL and VG standards (with model 56)
- Radio monitoring
- AC supply and battery operation
- Synthesizer: Frequency resolution 1 kHz, with SSB 100 Hz
- Automatic frequency scanning with constant and frequency-proportional step sizes; automatic scanning with up to 50 preset fixed frequencies
- Automatic gain correction in the whole frequency range after calibration (sinewave calibration as well as pulse calibration for broadband interference measurements)
- Measurement of voltage, field strength, current, spectral pulse density and two port attenuation with display of physical units; automatic, consideration of probe and bandwidth correction factors; input of any frequency-dependent correction factors (current probes, antennas) as well as of frequency-dependent attenuation or gain possible
- Additional evaluation capabilities for radio monitoring; modulation-depth and frequency-deviation measurements, remote frequency and frequency-offset measurements with the aid of built-in IF counter, recording of band occupancy, SSB demodulator, AF filter and squelch with programmable response threshold, built-in loudspeaker, indication of date and time of day
- Fast automatic field-strength recording in moving vehicle (field-strength statistics)
- Facilities for connection of XY, YT recorders and up to 5 Radio monitoring Recorders ZSG 3 from Rohde and Schwarz
- IEC-bus interface with listener and talker function; talk-only mode for data recording without controller
- Non-volatile storage of 10 complete device settings, 5 data sets for automatic frequency scanning, one data set with 50 fixed frequencies and two data sets for correction factors
- Full compatibility with Test Receiver ESH 3 (9 kHz TO 30 MHz) with respect to operational concept and IEC-bus commands
- Connectors for AC supply and 24-V battery
The Rohde and Schwarz ESVP Test Receiver measure and demodulates AM double-sideband, single-sideband, pulse-modulated and FM signals as well as narrowband and broadband interference. High overload capacity, a wide dynamic range and manifold evaluation capabilities make the ESVP suitable for selective voltage and two-port measurements in automatic test systems and all applications in the field of radio monitoring and EMC measurements.
In its frequency-related characteristics and application capabilities the ESVP is very similar to the ESV in measurement convenience, intelligence and system compatibility to the ESH 3; its frequency range overlaps and extends that of the ESH 3.
Manufacturer | Rohde & Schwarz |
---|---|
Condition | Used |
Frequency | 1.3 GHz |
Looking for other manuals? Search all of our available manuals here.