Additional Features:
- Frequency range: 20 Hz-3.5 GHz
- Resolution bandwidths 1 Hz to 10 MHz, adjustable in steps of 1/2/3/5/10
- Displayed noise floor: -150 dBm (typ.) in 10-Hz bandwidth
- 3rd-order intercept point +20 dBm typ.
- 1 dB compression point of RF input +10 dBm
- Phase noise at 10 kHz from carrier: -123 dBc (Hz) (typ.) (FSEA 30)
- Total level measurement uncertainty up to 1 GHz <1 dB, up to 7 GHz 1.5 dB
- AM/FM audio demodulator (with built-in loudspeaker and headphones connector)
- Internal RF trigger (trigger threshold approx. -20 dBm)
- 5 ms full-span sweep time with fully synchronized sweep (FSEA, FSEB)
- 1 Micros zero-span sweep time
- Pretrigger and trigger delay
- Gated sweep
The Rohde & Schwarz FSEA30 Spectrum Analyzer has been optimized to meet the stringent requirements of testing advanced digital communication systems. The Rohde & Schwarz FSEA30 features low phase noise and OCXO and FFT Filter.
The FSEA spectrum analyzers from Rohde & Schwarz have been optimized both for general-purpose measurements and meeting the stringent requirements of testing advanced digital communication systems. High measurement speed,future-proof modular design and excellent characteristics put the analyzers right at the top of today's market.
Manufacturer | Rohde & Schwarz |
---|---|
Condition | Used |
Frequency | 3.5 GHz |
B15 | Controller |
---|---|
B16 | Ethernet Interface |
B17 | 2nd IEC/IEEE-Bus Interface for FSE |
B21 | External Mixer |
B22 | INCREASED LEVEL ACCURACY TO 2GHZ |
B23 | BROADBAND OUTPUT 741.4MHZ |
B4 | Low Phase Noise and OCXO |
B5 | FFT Filter |
B7 | Vector Signal Analyzer |
B8 | TRACKING GENERATOR 3.5GHZ |
B9 | Tracking Generator with I/Q Modulator |
Looking for other manuals? Search all of our available manuals here.