Additional Features:
- Frequency Range: 9 kHz to 7 GHz
- Input Impedance: 50 Ohm
- Sweep Time: 1 us to 1500 sec
- Resolution Bandwidth: 10 Hz to 10 MHz
- Resolution Bandwidth Steps: 1/2/3/5
- Video Bandwidth: 1 Hz to 10 MHz
- Video Bandwidth Steps: 1/2/3/5 Single-Side-Band
- Maximum Single-Side-Band Noise: -129 dBc/Hz to -79 dBc/Hz
- Displayed Average Noise: -139 dBm to -84 dBm
- Maximum Dynamic Range: 152 dB
- Trigger Source External, Internal Freerun, TTL
- Demodulation AM, FM
The Rohde & Schwarz FSEB20 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities.
The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
| Manufacturer | Rohde & Schwarz |
|---|---|
| Condition | Used |
| Frequency | 7 GHz |
| B15 | Controller |
|---|---|
| B16 | Ethernet Interface |
| B17 | 2nd IEC/IEEE-Bus Interface for FSE |
| B21 | External Mixer |
| B22 | INCREASED LEVEL ACCURACY TO 2GHZ |
| B23 | BROADBAND OUTPUT 741.4MHZ |
| B4 | Low Phase Noise and OCXO |
| B5 | FFT Filter |
| B7 | Vector Signal Analyzer |
| B8 | TRACKING GENERATOR 3.5GHZ |
| B9 | Tracking Generator with I/Q Modulator |
- Rohde and Schwarz FSEA20, FSEA30, FSEB20, FSEB30, FSEM20, FSEM30, FSEK20, FSEK30 Operating Manual-Volume 1
- Rohde and Schwarz FSEA20, FSEA30, FSEB20, FSEB30, FSEM20, FSEM30, FSEK20, FSEK30 Operating Manual-Volume 2
Looking for other manuals? Search all of our available manuals here.