Additional Features:
- Supported in version 2.2 of NI-488.2 or earlier
- Not supported in versions later than 2.2
- Completely IEEE 488.2 compatible
- Controls up to 14 GPIB instruments
- Compact size and light weight
- Plug and Play configuration
- USB 2.0 full-speed signaling – 12 Mb/s
- 650 kB/s maximum transfer rate
- No external power required
- Built-in 2 m USB cable
- No GPIB cable required to connect to instruments
Operating Systems
- Windows 2000/XP/Me/98
Recommended Software
- LabVIEW
- LabWindows/CVI
- Measurement Studio
Specifications:
USB Port
- Full-speed USB signaling: 12 Mb/s
IEEE 488 Compatibility
- IEEE 488.1 and IEEE 488.2 compatible
Maximum IEEE 488 Bus Transfer Rates
- Standard IEEE 488 handshake: 650 kB/s
External Indicators
- USB configured, USB active
Power Requirement
- USB self-powered device
- Maximum power consumption: 200 mA
Physical
- Dimensions: 10.7 by 6.6 by 2.6 cm (4.2 by 2.6 by 1.0 in.)
I/O Connectors
- GPIB: IEEE 488 standard 24 pin
- USB: USB standard series A plug
Operating Environment
- Temperature: 0 to 55 °C
- Relative humidity: 10 to 90%, noncondensing
Storage Environment
- Temperature: -20 to 70 °C
- Relative humidity: 5 to 95%, noncondensing
On a Windows operating system, NI-488.2 versions 2.0 - 2.3 support both the GPIB-USB-A and the GPIB-USB-B. There is no support for GPIB-USB-A on a Linux operating system.
The compact National Instruments GPIB-USB-A transforms any computer with a USB port into a full-function, IEEE 488.2 controller that can control up to 14 programmable GPIB instruments. The small size and light weight of the NI GPIB-USB-A make it ideal for portable applications using a laptop computer or other applications in which the computer has no available internal I/O slots. The GPIB-USB-A works with Windows 2000/XP/Me/98 computers with a USB port.
The GPIB-USB-A is easy to install and use because there are no external DIP switches and you do not need to restart your computer for the system to recognize your IEEE 488.2 interface. The GPIB-USB-A is a plug-and-play interface that the OS automatically recognizes and configures as soon as you physically attach it to the USB port on your computer. With the GPIB-USB-A, you can get up and running quickly, so you can focus on developing your instrument control applications.
Using a TNT family Talker/Listener/Controller IEEE 488.2 ASIC, the GPIB-USB-A implements the full range of GPIB controller functions, including those required and recommended by IEEE 488.2. It also implements normal and extended talker and listener, serial and parallel polling, service requests, and pass/receive control functions. Drawing power directly from the USB port, the GPIB-USB-A requires no external power input. With NI-488.2, you get a robust driver with additional utilities and wizards that help you troubleshoot your applications and decrease your development time. Furthermore, you maintain compatibility with existing systems. Applications previously written for other National Instruments GPIB controllers can run unmodified with the GPIB-USB-A.
Connecting the GPIB-USB-A to Your Instruments
The GPIB-USB-A does not require a GPIB cable for connecting to your instruments. You can attach it directly to the GPIB port on your instrument and then connect the USB cable to the USB port on your computer. If you have multiple instruments in a daisy chain or star configuration, attach any cables that connect to the other instruments first, and then piggyback the GPIB-USB-A as the last connector in the stack.
| Manufacturer | National Instruments |
|---|---|
| Condition | Used |