Features:
- 4-Wire Data Line Network Coupler Coupling System for 6.6kV Surge
- Surge Test Voltage: 0.5 - 7.6 kV
- Coupling resistors: 1x25, 2x50, 3x75, 4x100W
- Coupling capacitors: 0.5mF / 0.1mF
- Coupling gas arrestors: 90V
- EUT voltage: 500V (capacitor) 66V (arrestor)
- EUT connectors: 4 x 4mm banana plugs + ground
- Surge connectors: High and Common
- Coupling CWG surges
- Coupling 10/700 surges
- Test circuit impedance maintained at 40 ohms
- Resistor, capacitor and gas arrestor coupling
- Manual operation
- Can be used with any surge generator
- Impulse power 6.6kV
- Supplied to ISO 9001
IP6.2 surge coupler is used to couple the 1.2/50 µs, 8/20 µs, 10/160ms, 10/560ms and 10/700 µs surge impulses on data, signal and telecom lines.
Coupling is effected via gas arrestors, capacitors and resistors. The three coupling methods can be selected, depending on the signals to be transmitted.
The IP6.2 is used either on it’s own or with a decoupling unit such as the Haefely DEC 1A or DEC 3A.
In its standard form, the IP6.2 can be used for testing to IEC, FCC, FTZ and ITU (CCITT) standards.
IP6.2 is able to cover so many standards thanks to a thorough understanding of telecoms requirements. Our commitment is your guarantee. This concept enables different test methods to be implemented at very little cost in time or money, thus protecting the financial investment and enabling customers to keep up with changing standards and test requirements.
IP6.2 is designed to a high technical specification for product quality, flexibility and personnel safety.
The standard unit includes three coupling possibilities: resistors, capacitors, gas arrestors
IEC 61000-4-5 describes testing of up to 4 data and telecom cables. The test system must always have a 40 ohm impedance. An important feature of IP6.2 is it’s ability to maintain this impedance, for telecoms testing, for both the 10/700 and CWG impulses.
IP6.2 requires no external power supplies and can be operated with any surge generator up to 6.6kV.
IP6.2 is a versatile unit for multiple line coupling.
Front panel of the IP6.2 is a graphical representation of the coupling circuits making configuration to the different surge test standards fast and easy:
- 40W/25 to 100W
- 40W/0.5mF
- 40W/0.1mF
Coupling paths are selected using high voltage safety plugs on the instrument front panel.
Together with the Haefely EMC decoupling units: DEC1A (for analogue Telecom), DEC3A (for I/O datalines) the IP6.2 provides a cost effective straightforward solution to increasingly complex test standards.
The image is a representation of selection. See specifications for product details.
| Manufacturer | Haefely |
|---|---|
| Condition | Used |