Sell Test Equipment

IQA-1921C Kaelus PIM Analyzer

Used
The IQA-1921C is a 2.1 GHz pim analyzer from Kaelus.

Features:

  • Dual band PCS/AWS
  • TX Range: 1930-1990MHz/2110-2155MHz
  • RX Range (PIM): 1710-1755MHz/1850-1910MHz
  • RTF Module #: RTF-2000A (not included)
  • Measurement method: Reverse (reflected) PIM, 3rd, 5th, 7th, 9th and 11th order
  • Residual PIM: < -115dBm/-158dBc max (<-125dBm/-168dBc typ) (x2 @ 20W)
  • User interface ports: 3x USB, x1 LAN, 1x RF output (7-16 DIN female), 1x monitor port (N female)
  • Display: 8.4in (213mm) touch screen display
  • Rugged, reliable construction suitable for field use
  • Fully configurable frequencies, powers and IM products
  • Integrated polycarbonate transit case
  • Simple to operate touch screen interface
  • Range to Fault (RTF) enabled - Spectrum monitor, frequency sweep and time trace modes

Transmitter

  • Transmit frequencies: 1930-1990MHz/2110-2155MHz
  • Frequency increment: 50 kHz
  • Frequency accuracy: ± 5ppm (max), aging ± 1ppm (max) after first year
  • Power per tone (adjustable): 2x 2 to 20W (+33 to +43dBm)
  • Power accuracy (per tone): ± 0.5dB (max)

Receiver

  • Receive band (50kHz steps): 1710-1755MHz/1850-1910MHz
  • Measurement noise floor: < -128dBm
  • Measurement range: -50dBm to -128dBm
  • Mains power: 115-230V, 50/60Hz AC
  • Power consumption: 650W
  • Operating temperature range: -10°C to +40°C
  • Storage temperature range: -20°C to +60°C
  • Ingress protection (IP): IP20 (with lid open) IP21 (with lid closed)
  • Relative humidity: 5% to 95% RH non-condensing
  • Mechanical shock: 40G shock rating

The iQA series Passive Intermodulation (PIM) analyzer is a feature rich, high power PIM test solution. This field proven analyzer enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. The design includes an integrated panel PC with intuitive touch screen interface for performing tests and generating site reports.

This version of the iQA ships from the factory enabled to support Range to Fault (RTF) technology: with the purchase of an optional RTF module, operators are able to activate RTF mode within the iQA user software to accurately measure the distance to return loss faults as well as the distance to PIM faults at the cell site.

The RTF modules are sold separately.

ValueTronics New and Used Test Equipment, All Rights Reserved