LIN-120C Com-Power LISN

Features:

• Type- 50Ω / 50 μH (CISPR), 50 μH (ANSI)
• Frequency Range- 150 kHz to 30 MHz
• Insertion Loss- < 1 dB
• Isolation- >40 dB

Electrical:

• Voltage Rating- 270 VoltsAC (rms), 380 VoltsDC (Line to Ground)
• Current Rating- 20 AmpsAC (rms), 14 AmpsDC

Input/Output Connectors:

• EUT Power Input Port- IEC C20 Receptacle
• EUT Power Output Port- Universal Multi-Configuration AC Receptacle
• RF Measurement Port- 50Ω - N-Type (female)

The Com-power LIN-120C Line Impedance Stabilization Network (LISN) is in full compliance with both CISPR 16-1-2 and ANSI C63.4. It provides the necessary measurement platform for performing power line conducted emissions compliance testing as required by most worldwide standards for commercial products. 

The LIN120C performs each of the following functions during the measurement:

• Provides a defined, stable impedance across the measurement frequency range
• Isolates the EUT and measurement circuit from the power source, thereby minimizing its influence on the measurements
• Couples the disturbance voltages to the coaxial measurement port (either directly, or through a transient limiter w/10 dB attenuation, depending on switch position), for connection to the measuring instrument.

This LISN uses air-core inductors to prevent saturation and permeability variation. Its mounting plate is left unpainted in order to facilitate connection to earth ground in its installation, which is essential due to high leakage current.

The LIN-120C model replaces the LIN-120A.

The image is for reference only. See product specification for details.