MS-250 LeCroy Logic Probe

Features:

• MS-250 - 250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option

Includes:

• Mixed Signal Accessory: Provides 18-channel digital acquisition and triggering.
• 16" Digital Leadset: Interfaces the MS-250 to the device under test. The lead set terminates in a 25 mil pin socket. Micro-gripper probes of various sizes are available as accessories from Teledyne LeCroy, and may be connected to the lead set. The lead set is divided into two banks. Each lead within the bank is colorcoded (to resistor color-coding standard) and has an individual ground connection. In addition, there are two common ground leads available for use.
• Bus Cable: 1.3m cable to connect Mixed Signal Accessory to the main oscilloscope unit, includes USB2.0 cable. This connection provides timebase synchronization, cross-triggering and power.
• 3" Flexible Ground Lead: Lead for grounding individual digital inputs 
• Ground Extender:  Connect to ground port of any digital input and make a simple signal and ground connection to a 0.1” square pin header. 
• Carrying Case
• Operator's Manual

The MS-250 Mixed Signal Oscilloscope Option is a complete system that adds digital acquisition and triggering capabilities to a Teledyne LeCroy oscilloscope. The MS-250 is a powerful solution for the challenge of measuring multiple, mixed signals in a single oscilloscope. An enhancement to the Teledyne  LeCroy oscilloscopes, the MS-250 extends their testing range by adding 18 digital channels for display or triggering.

The Ultimate Mixed Signal Oscilloscope

A mixed signal oscilloscope (MSO) is the ideal tool for the design and debug of today’s embedded systems providing the only way to see analog, digital and serial data signals simultaneously on one instrument as they occur in real time. Embedded system designers need to view signals into and out of devices such as microcontrollers, DSPs, FPGAs,ADCs, DACs, and transducers while ensuring proper timing and bus traffic.

Unmatched Digital Performance

The MS-250 is the ideal tool for testing embedded systems with 8 bit microcontrollers or slower digital signals. With 250 MHz max input frequency, 18 channels and 10 Mpts/Ch memory the MS-250 is an outstanding value and provides a complete set of tools for embedded system testing.