Chat Live
Contact Us
sales@valuetronics.com
The BTS Master MT8221B and MT8222B are high-performance handheld base station analyzers from Anritsu, introduced for installation and maintenance of wireless networks. Each model combines a Cable and Antenna Analyzer, a Spectrum Analyzer, and a Power Meter in a single handheld instrument, with support for HSPA+ and LTE, 20 MHz demodulation bandwidth, and a Vector Signal Generator for receiver testing.
The platform is built for installation and maintenance of wireless networks. Across its three core functions and optional packages it covers cable and antenna line sweep measurements (Return Loss, VSWR, Cable Loss, Distance-to-Fault, Phase, and Gain), spectrum and interference analysis, channel scanning, coverage mapping, PIM analysis when paired with PIM Master, and E1/T1/T3 backhaul bit-error-rate testing.
ValueTronics supplies this instrument from our own 20,000 square foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois, where we stock and hold our inventory rather than sourcing to order. Every used unit is inspected and functionally verified in-house before it ships, while new units ship factory-sealed exactly as received from the manufacturer.
The BTS Master MT822xB series is a family of high-performance handheld base station analyzers comprising the MT8221B and MT8222B. Both models integrate a Cable and Antenna Analyzer, a Spectrum Analyzer, and a Power Meter, and both are introduced for installation and maintenance of wireless networks with support for HSPA+ and LTE and an optional Vector Signal Generator for receiver testing.
The two models share an identical Spectrum Analyzer range of 150 kHz to 7.1 GHz and an identical Power Meter range of 10 MHz to 7.1 GHz. They differ in the frequency coverage of the Cable and Antenna Analyzer, which sets the primary selection point between them.
Each model below is its own dedicated product page with pre-owned-matched pricing. Select the model whose frequency coverage matches your application, then choose the listing for the condition you need.
The defining difference within the series is the Cable and Antenna Analyzer frequency range: the MT8221B covers 400 MHz to 4 GHz, while the MT8222B extends to 400 MHz to 6 GHz. The Spectrum Analyzer (150 kHz to 7.1 GHz) and Power Meter (10 MHz to 7.1 GHz) ranges are the same on both models, as is the optional Vector Signal Generator range of 400 MHz to 6 GHz.
The two models share the same option catalog, including the optional signal analyzers, interference analyzer, channel scanner, coverage mapping, and backhaul testers, with option codes prefixed per model. Refer to the comparison table that follows for the frequency ranges and configuration details that distinguish each model.
| Model | Cable & Antenna Analyzer Range | Spectrum Analyzer Range | Power Meter Range |
|---|---|---|---|
| MT8221B | 400 MHz to 4 GHz | 150 kHz to 7.1 GHz | 10 MHz to 7.1 GHz |
| MT8222B | 400 MHz to 6 GHz | 150 kHz to 7.1 GHz | 10 MHz to 7.1 GHz |
Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.
| Specification | Value |
|---|---|
| Cable and Antenna Analyzer | |
| Measurements | VSWR, Return Loss, Cable Loss, Distance-to-Fault (DTF) VSWR, DTF Return Loss, 1-port Phase, 2-port Phase, 2-port Gain, Smith Chart |
| Frequency Range | 400 MHz to 4 GHz (MT8221B), 400 MHz to 6 GHz (MT8222B) |
| Frequency Accuracy | ± 3.0 ppm |
| Frequency Resolution | 1 kHz (RF immunity low), 100 kHz (RF immunity high) |
| Output Power, High | -7 dBm, typical, 1 or 2-port |
| Output Power, Low | -40 dBm, typical, 2-port |
| Dynamic Range (400 MHz to 3.0 GHz) | 80 dB |
| Dynamic Range (> 3.0 GHz to 4.0 GHz) | 70 dB |
| Interference Immunity, On-Channel | +17 dBm @ >1.0 MHz from carrier frequency |
| Interference Immunity, On-Frequency | +10 dBm within ±10 kHz from the carrier frequency |
| Measurement Speed, Return Loss | ≤ 4.5 ms/data point, RF immunity low, typical |
| Measurement Speed, Distance-to-Fault | ≤ 4.5 ms/data point, RF immunity low, typical |
| Return Loss Measurement Range | 0 to 60 dB (Resolution 0.01 dB) |
| VSWR Measurement Range | 1:1 to 65:1 (Resolution 0.01) |
| Cable Loss Measurement Range | 0 to 30 dB (Resolution 0.01 dB) |
| 2-Port Gain Measurement Range | -120 to +100 dB (Resolution 0.01 dB) |
| Distance-to-Fault Horizontal Range (m) | 0 to (Data Points-1) x Fault Resolution, to a maximum of 1500 m (4921 ft) |
| Phase (1- and 2-Port) Measurement Range | -180° to +180° (Resolution 0.01°) |
| Smith Chart Resolution | 0.01 |
| Corrected Directivity | > 42 dB |
| Data Points | 137, 275, 551 |
| Bias-Tee Voltage Range (Option 0010) | +12 V to +32 V |
| Bias-Tee Current (Low/High) | 250 mA/450 mA, 1 A surge for 100 ms |
| Spectrum Analyzer | |
| Frequency Range | 150 kHz to 7.1 GHz (usable to 0 Hz) |
| Maximum Continuous Input | +30 dBm |
| Tuning Resolution | 1 Hz |
| Frequency Reference Aging | ± 1.0 ppm/10 years |
| Frequency Span | 10 Hz to 7.1 GHz including zero span; Accuracy ± 0.3 ppm (25 °C ± 25 °C) + aging |
| Sweep Time | Minimum 100 ms, 10 μs to 600 s in zero span; Accuracy ± 2 % in zero span |
| Resolution Bandwidth (RBW) | 1 Hz to 3 MHz in 1-3 sequence ±10 % (1 MHz max in zero-span) (-3 dB bandwidth) |
| Video Bandwidth (VBW) | 1 Hz to 3 MHz in 1-3 sequence (-3 dB bandwidth) |
| RBW with Quasi-Peak Detection | 200 Hz, 9 kHz, 120 kHz (-6 dB bandwidth) |
| SSB Phase Noise | -100 dBc/Hz @ 10 kHz, 20 kHz and 30 kHz offset from carrier; -102 dBc/Hz @ 100 kHz offset from carrier |
| Dynamic Range | > 95 dB (600 MHz, 3.5 GHz), 2/3 (TOI-DANL) in 1 Hz RBW |
| Measurement Range | DANL to +30 dBm |
| Display Range | 1 dB to 15 dB/div in 1 dB steps, ten divisions displayed |
| Reference Level Range | -120 dBm to +30 dBm |
| Attenuator Resolution | 0 dB to 65 dB, 5.0 dB steps |
| DANL, 3 MHz to 1.0 GHz (1 Hz RBW, 0 dB att) | Preamp Off: -137 dBm max, -150 dBm typ; Preamp On: -161 dBm max, -163 dBm typ |
| DANL, > 1.0 GHz to 2.2 GHz | Preamp Off: -133 dBm max, -147 dBm typ; Preamp On: -159 dBm max, -160 dBm typ |
| DANL, > 2.2 GHz to 4.0 GHz | Preamp Off: -133 dBm max, -143 dBm typ; Preamp On: -156 dBm max, -159 dBm typ |
| DANL, > 4.0 GHz to 7.1 GHz | Preamp Off: -130 dBm max, -138 dBm typ; Preamp On: -154 dBm max, -156 dBm typ |
| Third-Order Intercept (TOI), Preamp Off, 600 MHz | +8 dBm typical |
| Third-Order Intercept (TOI), Preamp Off, 3.5 GHz | +9 dBm typical |
| Second Harmonic Distortion, Preamp Off | -50 dBc maximum, -70 dBc typical |
| VSWR (<4.0 GHz) | 1.5:1 typical |
| VSWR (4.0 GHz to 7.1 GHz) | 1.8:1 typical |
| Residual Spurs, Preamp Off | -90 dBm, 150 kHz to 3.2 GHz; -84 dBm, > 3.2 GHz to 7.1 GHz |
| Residual Spurs, Preamp On | -100 dBm, 10 MHz to 7.1 GHz |
| Power Meter | |
| Frequency Range | 10 MHz to 7.1 GHz |
| Span | 1 kHz to 100 MHz |
| Display Range | -140 dBm to +30 dBm, ≤ 40 dB span |
| Measurement Range | -120 dBm to +30 dBm |
| Offset Range | 0 to +100 dB |
| VSWR | 1.5:1 typical |
| Maximum Power | +30 dBm without attenuator |
| Accuracy | Same as Spectrum Analyzer |
| General | |
| Internal Trace/Setup Memory | > 30,000 traces |
| External Trace/Setup Memory | Limited by size of USB Flash drive |
| Display Size | 8.4 in |
| Display Resolution | 800 x 600 |
| Battery Type | Li-Ion |
| Battery Operation | 2.5 hours, typical |
| Safety Class | EN 61010-1 Class 1 |
| Product Safety | IEC 60950-1 when used with Company supplied Power Supply |
| Operating Temperature | -10 °C to 55 °C |
| Maximum Humidity | 85 % |
| Shock | MIL-PRF-28800F Class 2 |
Important: RF In maximum input: +30 dBm, plus or minus 50 VDC (Type N, female, 50 Ohm).
Important: GPS Receiver (Option 0031): the GPS antenna is sold separately and is not included.
Important: High Accuracy Power Meter (Option 0019) requires an external USB Power Sensor (e.g. PSN50, MA24105A, MA24106A, MA24108A/18A/26A), which is ordered separately.
Important: PIM Analyzer functionality requires the separate PIM Master (see Product Brochure 11410-00546).
Important: Calibration components (Open/Short/Load) and phase-stable test port cables, recommended for cable and antenna line sweep applications, are listed as Optional Accessories and are not included with the standard instrument.
Important: Backhaul Analyzer options are mutually exclusive: Option 0051 (T1), Option 0052 (E1), and Option 0053 (T3/T1) cannot be installed together.
Important: Recommended calibration cycle is 12 months.
This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.
ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.
Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.
Model No
Anritsu
Condition
Pre-Owned
Manufacturer
Anritsu
Cabant_ana_freq
400 MHz to 4 GHz
Spec_ana_freq
150 kHz to 7.1 GHz
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
30+ Years in Business
Secure Payments
Sell Test Equipments
Knowledgeable Staff
On-site Lab
Request A Quote
