Additional Features:
- 10 MHz to 50 GHz
- 2- or 4-ports with two built-in sources
- 126 dB system and 129 receiver dynamic range, 32,001 points, 200 channels, 15 MHz IF bandwidth
- High output power (+16 dBm), low harmonics (-60 dBc) and a wide power sweep range (41 dB)
- Best dynamic accuracy: 0.1 dB compression with +15 dBm input power at the receiver
- Low noise floor of -111 dBm at 10 Hz IF bandwidth
Applications:
- S-parameters (CW and pulsed)
- Noise figure
- Gain compression
- Intermodulation and harmonic distortion
- Conversion gain/loss
- True-differential stimulus
- Millimeter-wave
- Nonlinear waveform and X-parameter® characterization
- Antenna test
The Agilent N5245A PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
| Frequency | 50 GHz |
| 007 | Automatic Fixture Removal |
|---|---|
| 008 | Pulsed-RF Measurements |
| 010 | Time-domain measurements |
| 015 | Dynamic Uncertainty for S-Parameter Measurements |
| 020 | Add IF inputs |
| 021 | Add pulse modulator to internal first source |
| 022 | Add pulse modulator to internal second source |
| 025 | Internal pulse generators, Add 4 |
| 028 | Noise figure measurements using standard receivers |
| 029 | Fully-corrected noise-figure measurements to 13.5 GHz |
| 080 | Frequency offset measurements |
| 082 | Scalar calibrated converter measurements |
| 083 | Vector and scalar calibrated converter measurements |
| 084 | Add embedded LO measurements |
| 086 | Gain compression measurements |
| 087 | Intermodulation distortion measurements |
| 088 | Source phase control |
| 089 | Differential and I/Q devices application |
| 090 | Spectrum Analyzer |
| 118 | Fast CW mode |
| 1CM | Rack mount kit for installation without handles |
| 1CP | Rack mount kit for installation with handles |
| 200 | 2 ports, single source |
| 201 | 2-ports, single source, with configurable test set |
| 219 | Add extended power range and bias-tees to 2 port analyzer |
| 224 | Add internal second source, combiner and mechanical switches to 2-port analyzer |
| 301 | Application for use with standard CalPods |
| 302 | Application for use with temperature-characterized CalPods |
| 400 | 4 ports, dual source |
| 417 | 4-ports, dual source, with extended power range |
| 419 | Add extended power range and bias-tees to 4 port analyzer |
| 423 | Add internal combiner and mechanical switches to 4-port analyzer |
| 460 | Integrated true-mode stimulus application |
| 510 | Nonlinear component characterization, full frequency range |
| 514 | Nonlinear X-Parameters |
| 518 | Nonlinear Pulse Envelope Domain |
| 520 | Arbitrary load impedance X-parameters |
| 551 | N-port calibrated measurements |
| WIN7 | Windows 7 |
No manuals are currently available. Search all of our available manuals here.