Sell Test Equipment

N9913A Agilent Cable and Antenna Analyzer

Used

The N9913A is a 4 GHz Cable and Antenna Analyzer from Agilent. Technicians and site engineers use cable and antenna analyzers for sweep tests during and after installations. Cable and antenna analyzers are pieces of electronic test equipment that monitor wireless sites and locate problems to make repairs.

Additional Features:

  • 4 GHz max frequency
  • CAT/VNA Start Frequency: 30 kHz
  • SA Start Frequency: 5 kHz
  • Dynamic Range: 95 dB
  • Output Power: -1 dBm
  • Trace Noise: 0.004 dBrms
  • Number of Built-In Ports: 2 ports
  • Best Speed at 201 Point, 1 Sweep: 210 ms
  • Carry the world’s most integrated handheld RF analyzer: standard model includes cable and antenna analyzer
  • Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
  • Save time by measuring DTF and TDR in the same sweep
  • Simultaneously measure all four S-parameters
  • Make accurate spectrum analyzer measurements (± 0.5 dB) without warm-up
  • Calibrate simply with QuickCal

Applications      

  • S-Parameters
  • Distance-To-Fault
  • Cable Trimming
  • Return Loss
  • Insertion Loss/Gain
  • Interference Analysis
  • Power Measurements
The N9913A FieldFox 4 GHz RF Combination Analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, and built-in GPS receiver.

4 GHz max frequency

CAT/VNA Start Frequency            30 kHz

SA Start Frequency         5 kHz

Dynamic Range 95 dB

Output Power   -1 dBm

Trace Noise        0.004 dBrms

Number of Built-In Ports               2 ports

Best Speed at 201 Point, 1 Sweep             210 ms

Carry the world’s most integrated handheld RF analyzer: standard model includes cable and antenna analyzer

Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more

Save time by measuring DTF and TDR in the same sweep

Simultaneously measure all four S-parameters

Make accurate spectrum analyzer measurements (± 0.5 dB) without warm-up

Calibrate simply with QuickCal

ValueTronics New and Used Test Equipment, All Rights Reserved