Features:
- 9 GHz FieldFox Microwave Analyzer
- Base model includes cable and antenna analyzer
- Expand capabilities with optional vector network analyzer, spectrum analyzer, real-time spectrum analyzer, and more
- Capture intermittent signals with 100 MHz gap-free real-time bandwidth
- Simultaneously measure all four S-parameters with 115 dB system dynamic range
- Make accurate spectrum analyzer measurements (±0.3 dB) without warm-up
- Validate network performance with over-the-air measurements for 5GTF and LTE
- GPS/GNSS receiver for geolocation and time stamp precision
- Lightest all-in-one analyzer at only 7.35 lb. (3.34 kg)
- New high capacity battery providing over 5 hours of battery life
FieldFox, the industry's most versatile portable analyzer, has launched this new line of future-ready analyzers to address the ever-increasing demands of 5G, satellite communications, signal monitoring and electronic warfare applications. All existing FieldFox A Series measurement capabilities (except QuickCal) are supported on the new FieldFox B Series. 100 MHz (Option B10) and 40 MHz (Option B04) analysis bandwidth options will be available on the B models, with 10 MHz as the standard option.
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
| 010 | Vector network analyzer time domain Requires 210, recommend 211 |
|---|---|
| 030 | Remote control capability Requires an iOS device or an Android device |
| 208 | USB power sensor measurements versus frequency Requires 302 |
| 209 | Extended range transmission analysis (ERTA) Requires 233 and 210 1, recommend 307 |
| 210 | Vector network analyzer transmission/reflection |
| 211 | Vector network analyzer full 2-port S-parameters Requires 210 |
| 212 | 1-port mixed-mode S-parameters Requires 210 and 211 |
| 215 | TDR cable measurements |
| 233 | Spectrum analyzer |
| 235 | Pre-amplifier Requires 233 |
| 236 | Interference analyzer and spectrogram Requires 233 |
| 238 | Spectrum analyzer time gating Requires 233 |
| 302 | USB power sensor support |
| 307 | GPS receiver |
| 308 | Vector voltmeter Requires 210 and 211 for full VVM functionality |
| 309 | DC bias variable-voltage source Recommend N9910X-713 cable |
| 310 | Built-in power meter |
| 312 | Channel scanner Requires 233 |
| 330 | Pulse measurements Requires 302 and USB peak power sensor |
| 350 | Real-time spectrum analyzer (RTSA) Requires 233, recommend 235 |
| 351 | I/Q analyzer Requires 233 |
| 352 | Indoor and outdoor mapping Requires 233, 307, and at least one of 312, 360, 370, 371, 377 or 378. |
| 353 | IQ streaming Requires 233 and 351 |
| 355 | Analog demodulation Requires 233 |
| 356 | Noise figure measurements Requires 233, 235, 309 and accessory cable N9910X-713 |
| 358 | EMF measurements Requires 233. Also requires triaxial isotropic antenna. |
| 361 | EMI measurements Requires 233 |
| 370 | Over the air LTE FDD measurements Requires 233 and 307, recommend 235 |
| 371 | Over the air LTE TDD measurements Requires 233 and 307, recommend 235 |
| 378 | Over-the-air (OTA) 5G NR measurements Requires 233, B10, and 307, recommend 235; N991x/3xB models require external mixer for FR2 frequencies above 26.5 GHz |
| B04 | Bandwidth, 40 MHz Requires 233. Recommend 350, 351 or PathWave VSA (formerly 89600 VSA) software |
| B10 | Bandwidth, 100 MHz Requires 233. Recommend 350, 351, 378 or PathWave VSA (formerly 89600 VSA) software |
No manuals are currently available. Search all of our available manuals here.