Additional Features:
- 20 GHz Probe Tip Bandwidth
- 50 Ω Impedance TDR Passive Probe
- Undisturbed 50 Ω Probe Reference Section
- Includes 20 GHz Precision SMA Cable
- Probe Tip Pressure Actuation Feature used to Actuate 80A02 EOS/ESD Protection Module
Applications
- Circuit Board Controlled Impedance Testing (TDR)
- Designed for Use with 80A02 EOS/ESD Protection Module
Characteristics
- Nominal Length with Cable: 1 meter
- Attenuation: 1X
- Probe Only Bandwidth: >20 GHz
- Probe Pitch: 1.8 mm (signal to ground)
- Cable Bandwidth: 20 GHz
- Connector Type: SMA
- Measured Reflected TDR Fall Time: <38 ps spec (<28 ps typical measure with 80E04)
- Loading Input: 50 Ω
- Max Vin: 5.0 V
- Probe Only Propagation Delay: 1.0 ns
- TDR Control Activation Force: 200 to 260 grams
The Tektronix P8018 Handheld TDR Probe is a greater than 20 GHz, 50 Ω input impedance, single-ended passive probe with a precision 20 GHz bandwidth SMA cable that provides a high performance solution for electrical sampling TDR circuit board impedance characterization and high-speed electrical signal analysis applications. The P8018 probe can be used as a stand alone high bandwidth probe, but it is specially designed with features to be used with the 80A02 EOS/ESD Protection Module for protecting the sampling bridge of Tektronix electrical sampling modules from damage due to electro-overstress (EOS) and electro-static discharge (ESD) where large static charges can be stored in the DUT.
The P8018 provides a unique probe tip pressure actuating feature and control circuit which, used with the matching 80A02 EOS/ESD Protection Module, enables a superior technique and performance capability for electrical sampling module EOS/ESD protection of acquired electrical signals and TDR measurements.
Manufacturer | Tektronix |
---|---|
Condition | Used |