POWERPAC 1000 Biorad DC Power Supply

Used
  • Constant voltage, constant power, or constant current operation with automatic crossover.
  • Continuous, timer, or volt-hour control.
  • Manual and Program modes of operation. In addition, the PowerPac 3000 offers Temperature mode operation.
  • I.E.C. 1010 international safety certification.
  • Automatic detection of no-load, rapid change in resistance, arcing, short circuit, and ground leakage.
  • Automatic completion (if desired) of a run interrupted by a power failure.
  • Backlit LCD graphics display.
  • Stackable case.
  • Viewing angle adjustment provided by two position leg.

PowerPac power supplies provide constant voltage, power, and current for electrophoresis applications. The PowerPac 1000 may be used for most isoelectrofocusing (IEF) applications, blotting, and general electrophoresis. Either PowerPac can be used also for SDS-PAGE, two-dimensional electrophoresis, native gel electrophoresis, and horizontal DNA/RNA electrophoresis.

  • Voltage Output: Adjustable from 5 to 1000 volts dc (VDC) in increments of 1 volt.
  • Current output: Adjustable from 1 to 500 milliAmps (mA) in increments of 1 mA.
  • Power output: Adjustable from 1 to 250 watts (W) in increments of 1 W

PowerPac power supplies operate at the value specified by the constant parameter. However, to prevent damage to your electrophoresis cell, PowerPacs provide automatic crossover to either constant current, constant voltage, or constant power, depending on which set value is first reached. When the set limit of a nonconstant parameter is reached, and the power capability of the unit is not exceeded, the power supply will switch, making the non-constant parameter the new constant parameter.

More Information
ManufacturerBiorad
ConditionUsed
Current500 mA
Voltage1 kV
Power250 W
Looking for other manuals? Search all of our available manuals here.