Features:
- Passive Probe
- Provided with several accessories designed to make probing and measurement simpler.
- Slide Switch: Used to set the probe attenuation ratio
- BNC Connector: Connected to the oscilloscope measuring channel
Accessories:
- Probe
- Hook Tip
- Ground Alligator Clip
- Adjustment Tool
- Ground Spring
- Insulation Cap
- Maker Rings
Specifications:
- Bandwidth: 1X: DC to 20 MHz, 10X: DC to 150 MHz
- Rise Time: 1X: 17.5 ns, 10X: 2.3 ns
- Attenuation Ratio: 10:1 or 1:1 Switchable
- Compensation Range: 10 pF to 25 pF
Before taking any measurement using a probe, first check the frequency compensation of the probe and adjust it to match the oscilloscope used. Generally, the oscilloscope provides a calibration signal output terminal at the front panel. Connect the probe (set the probe attenuation to 10X) to the signal output terminal to display a square waveform on the oscilloscope. Insert the adjustment tool into the compensation adjustment hole at the probe head and rotate it clockwise/counterclockwise until the properly compensated square waveform is displayed (flat-top square waveform).
Manufacturer | Rigol |
---|---|
Condition | New |
Looking for other manuals? Search all of our available manuals here.