Additional Features:
- P62 Series with Remote Option
- Three Phase Input
- Low Peak-to-Peak Ripple & Noise
- Optional GPIB & RS-232 Interface
Electrical Characteristics
- Input Power: 190-253 VAC, 47 to 63 Hz, Single Phase, 2-wire plus ground
- Regulation (Line or Load): Voltage: 0.1% of maximum output voltage; Current: 0.2% of maximum output current
- Transient Response: A 30% step load will recover to within 2% of original value within 10 ms
- Stability: ±0.05% of set point per 8 hours after warm-up and at a fixed line, load and temperature
- Remote Control/Monitor: On/Off control via contact closure, 6-120 VDC or 12-240 VAC, and TTL or CMOS switch, output voltage and current monitor, OVP limit set, and summary fault status
- Power Density: 2.5 Watts/cubic inch
- Power Factor: 0.72
Remote Programming
- Resistive: Constant Voltage (0-100%); Constant Current: (0-100%)
- Voltage: Constant Voltage (0-100%); Constant Current: (0-100%)
- Remote Sensing: Terminals are provided to sense output voltage at point of load
- Maximum line drop 3% of rated voltage per line, or 3V, whichever is less
Environmental Characteristics
- Temperature Coefficient: 0.2% /°C of maximum output voltage rating for voltage set point; 0.3%/°C of maximum output current rating for current set point
- Ambient Temperature: Operating: 0 to 50°C
- Storage: -20°to 70°C
- Cooling: Internal Fans
- Agency Approvals: TUV NRTL to EL1950; TUV to IEC 950; CE Mark
Physical Characteristics
- Width: 19 inches
- Depth: 18 inches
- Height: 3.5 inches
The Power Ten R62B-5060 is a general purpose power supply that is designed specifically for laboratory test and systems applications requiring variable DC sources with good ripple and regulation characteristics. The R62B-5060 is a constant current/constant voltage supply with an automatic crossover feature.
Manufacturer | Power Ten |
---|---|
Condition | Used |
Current | 60 A |
Voltage | 50 V |
Power | 3 kW |
Looking for other manuals? Search all of our available manuals here.